Split System Installation Oakleigh

Split System Install in Oakleigh

There’s nothing better than arriving home on a hot day of 40 degrees and switching on your split system air conditioning, and in a matter of minutes , your home and family members are cool.

Split system air conditioning offers this versatility, making them hard to beat. However, like all heaters and coolers that are required to run optimally they should be maintained and maintained to a high standard by qualified professionals. Melbourne Gas Heating Service offers experienced technicians who know split system air-conditioners in and out. They specialise in all makes and models and give you assurance that they can get the job done to a professional standard.

We offer a wide range of services that include the following:

• Split System Installation Oakleigh
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are fully qualified and licensed to perform all kinds of work. If you’re in search of [keywords lower] Oakleigh services then contact Local Heating and Cooling Professionals Oakleigh today and talk with one of our friendly team members.

How Do Split Systems Function?

The split systems of air conditioning are their name due to half it (condenser) being located outside the house , while the second portion (fan coil) is installed inside. In cooling, warm air inside the room is drawn in through the fan coil, and then taken out, resulting into cool air flowing back into the house. In reverse mode, it allows your heat pump operate in reverse, providing heating in cold weather.

Split air conditioning systems can be installed in individual rooms, areas , or rooms that are connected via copper pipes to an outdoor unit (condenser). Multiple-headed split-air conditioning units are able to be fitted for as many as nine rooms, with just one outdoor unit as well as allowing individual temperature control of each room.

What Are The Running Costs With Split Systems?

One of the brands we recommend of Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating during the summer and winter time The annual running expense would be $272.34.

Reduced Split System Operating Costs

It’s easy to cut down on your operating costs with the Split System. Depending on the model that you buy, as well as its star rating, you will be able to determine how much you will save each year. Beyond the initial cost to how you use the Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat to 24C and 26C to allow for cooling. Every degree lower in summer increases the running cost by approximately 10%..
• Utilize the economy setting if your split system has one. You should also regularly maintain your air cooling system.
• Keep the sun’s heat out by closing curtains and blinds in the morning. Close windows and doors to areas that are cooling when your split systems are on.
• When the split system is switched off , and the cooler outside, it is recommended to open the doors along with windows, allowing cool air flow in.
• Insulate your residence to prevent warm summer days out and cool inside during winter.
• Dress to suit the weather conditions.

Why Choose Split Systems?

Wall mounted split air conditioning systems are among the most commonly used residential air conditioning system because they are cost-effective and easily to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year as it maintains the temperature constant, cuts costs (less consumption of energy) and generates less sound when it is utilized. This is achieved through control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted wall mounted split AC systems are the best economical option for a single room apartment or small house since they are inexpensive to buy (depending on the number of indoor units you require) and they don’t require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is installed in, which means that each room is able to have various temperature.

Air Quality

A lot of split air conditioning systems come with air filtering functions and humidity control which control the amount dust and humidity in a room. This can provide those with sensitive conditions (children, elderly, asthmatic or allergic users) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to a single outdoor condenser that in turn provides you with satisfaction of having the ideal air conditioner (in terms of output and physical constraints) to a specific space.

Split System FAQ

Is a split system the same thing as the air conditioning?

It is true that Split System includes an air-conditioning unit. However, there are different types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All these systems operate on electricity & refrigerant under the same principal but very different in terms of how they are installed.

How long will it take to set up a split system air conditioner?

Generally speaking the typical AC split installation is expected to take between 3-6 hours. However, the exact amount of time will depend on various factors like below;

• Size and location of both outdoor and indoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In the majority of cases the air conditioner is at least 10 years and there are obvious issues with your AC there’s a good likelihood that it is cheaper to replace then repair.

For help in making the best decision, it is best to speak with the team at ComfyHome to get an honest evaluation of the condition of your AC.

What size of split system air conditioning will I require?

A standard measurements ratio is multiple the room area by a factor of 0.15 to calculate the necessary power of the measurement unit in kilowatts.

For a space of 40 square meters, you will require a split system air conditioning unit with 6 kW. A cooling unit of 2.5kW is the ideal size for 10 -20 sqm room areas.

The size of the Split system’s air conditioning can also be dependent on other factors such as the insulation in the room, the size of the room, and’ position.

For a precise assessment of the required Split units size we recommend you contact us for a comprehensive analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general, an air conditioner is built to last 10-20 years, on an average. But this depends on a lot of variables, including the model of the AC, quality of the installation, the routine maintenance history etc…

It is essential to service the Split System air conditioner often for a longer life span and to increase efficiency.

What is the best frequency to clean the air conditioner’s air filter?

According to Daikin Australia, it is strongly recommended that you clean your air conditioning filters every two weeks to improve the efficiency of the system and reduce energy consumption by 5%-15 percentage.

Oakleigh Gas Heating Services

• Vulcan Ducted Gas Heating Servicing & Repair Oakleigh
• Ducted Gas Heating Servicing & Repair Oakleigh
• Gas Hot Water System Installation & Repairs Oakleigh
• Braemar Ducted Gas Heating Servicing & Repair Oakleigh
• Gas Space Heater Repair Oakleigh
• Gas Log Fire Service & Repairs Oakleigh
• Evaporative Cooling Repair Oakleigh
• Gas Heating Oakleigh
• Gas Heating Service Oakleigh
• Carbon Monoxide Testing Oakleigh
• Gas Heating Installation Oakleigh
• Oakleigh
• Brivis Ducted Gas Heating Servicing & Repair Oakleigh
• Gas Heating Repairs Oakleigh

What Types of Systems We Service & Repair

Each type and brand of heating has it’s specific operation and maintenance needs; our experienced technicians are knowledgeable and know how to provide top-quality services for all heating systems, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in the field of heating repairs and maintenance and specialize in all types and brands of heating equipment. We take pride in a quick response time and commitment to quality, efficiency and reliability.

We service and maintain all major brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re personable and friendly
• Highly Experienced and Licenced Team
• Get a Free Quote and No Obligation

Our Promise To You

We at Melbourne Gas Heating Service we understand the inconvenience of not having any hot water. It’s a situation we do not believe anyone should need to go through. This is the reason we place such a high priority for hot water emergencies. Our experienced plumbers are reliable and friendly and without doubt, we can assist with any emergency.

We take pride in the quality of our customer service. It is our conviction that the minor things matter most.

We pride ourselves on our exceptional customer service. this is why our customers appreciate us:

• We always show up when we promise to be there.
• Our experts will give you their number when they’re thirty minutes away.
• Price upfront, competitive and professional advice prior to the start of the project.
• Always getting our hands clean after our own mess.

Our company Melbourne Gas Heating Service offer emergency and maintenance services in electrical, plumbing and heating. If you are unsure about our services, and the services we offer.