Split System Installation Rowville

Split System Install in Rowville

There’s nothing more enjoyable than coming home on a hot day and turning on your split system air conditioning and in just a couple of minutes your house and your family will be cool.

Split system air conditioning offers this the ability to be used in a variety of ways, making them difficult to beat. But , just like all heaters or coolers to make sure they’re running at their best they should be serviced and maintained to a high standard by experienced professionals. Melbourne Gas Heating Service offers experienced technicians who are familiar with split system air conditioners both inside and outside. They specialize in all models and models of these units and give you peace of mind that we will complete the task to professional standards.

We offer a wide range of services that include the following:

• Split System Installation Rowville
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are fully qualified and licensed for all sorts of jobs. If you’re looking for Split System Installation Rowville services then contact Local Heating and Cooling Professionals Rowville today and talk with one of our friendly team members.

How Do Split Systems Work?

Systems for split air conditioners have their name due to half that system (condenser) is located outside of the house while the other portion (fan coil) is installed inside. In cooling, warm air in the room is brought in from the fan coil before being is then removed, which results in cool air recirculating back into the home. The reverse cycle permits that the heating system to run in reverse to provide heating in cold weather.

Air conditioning split systems are fitted to individual rooms, zones or rooms joined by copper piping connecting to the outdoor unit (condenser). Split air conditioners with multiple heads can be set up for more than nine rooms using only one outdoor unit, as well as allowing the control of temperature for each room.

What Are The Ongoing Costs With Split Systems?

One of the brands we recommend that we recommend for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular heating & cooling during the summer and winter seasons, the annual running cost is $272.34.

Lowering the Split System Running Costs

It’s not difficult to cut down on your operating costs by using the Split System. Depending on the model that you buy, as well as its star rating, you will be able to determine how you’ll save each year. It is important to look beyond the initial cost and how you utilize the Split System can help as well.

Tips For Using Split Systems

• Set the thermostat to 24C and 26C for cooling. Any degree lower than that will raise the cost of running by approximately 10%..
• Use the economy setting in the event that your split system is equipped with one and regularly service your air conditioner.
• Keep the sun’s heat away by closing curtains as well as external blinds during the daytime. Close all doors and windows in areas being cooled when it is split running.
• When the split system has been switched off and its cooler outside, open doors as well as windows in order to let cool air circulate.
• Insulate your house to block the heat out in summer and inside in winter.
• Dress appropriately for the weather.

Why Select A Split System?

The wall mounted air conditioning system is the most commonly owned residential air conditioning system since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year as it maintains an even temperature, helps save costs (less energy consumption) and produces a lesser amount of sound when it is it is used. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall mounted divided AC models are most cost-effective option for a single room, apartment or small house as they are relatively cheap to buy (depending on how many indoor units you’ll need) and they don’t require necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the temperature of the room it is located in, thus each room can have a different temperatures.

Air Quality

Many AC splits have air filtering and humidity control features which control the amount dust and humidity inside the room. This can provide those with sensitive conditions (children older, asthmatic, or allergic people) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to one outdoor condenser, which in turn gives you satisfaction of having the most suitable cooling system (in terms of output and physical constraints) for a specific room.

Split System FAQ

Is a split system similar to an air conditioner?

Absolutely, Split System can be described as an air conditioner system. There are various types of air conditioning system includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principal but very different in terms.

How long will it take to install a split system air conditioner?

In general the typical AC split installation should last between 3 and 6 hours. However, the exact amount of time can vary based on various factors like below:

• Location and size of both the outdoor and indoor unit
• The routing of copper pipes between indoor and outdoor unit
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In most situation in the event that your A/C is more than 10 years old and has noticeable issues with your A/C there’s a good possibility that it will be more affordable to replace than repair.

To assist you in making the right decision To make the right choice, speak with the team at ComfyHome for an honest opinion on the condition of your air conditioner.

What size split system air conditioning do I need?

A common measuring ratio will multiple the area of the room by a factor of 0.15 to calculate the necessary power of the unit in kilowatt.

For a room with a size of 40sqm, you should have a Split system air conditioning unit with 6 kW. An air conditioning unit of 2.5kW is perfect for 10-20 sqm rooms spaces.

However, the size of the Split system’s required air conditioning is also affected by other variables such as the room insulation, quantity of residents and’ locations.

For an accurate assessment of the needed Split dimension, we suggest that you contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general air conditioners are built to last from 10-20 years, on an average. However, it is contingent on a variety of things like the brand of the A/C as well as the quality of the installation, routine maintenance history and more…

It is essential to service your split system air conditioner on a regular basis to extend its lifespan and improve effectiveness.

Do I need to clean my air conditioner air filter?

According to Daikin Australia, it is strongly suggested that you should clean your air conditioning filters every 2 weeks to increase the system’s efficiency and potentially reduce energy consumption by 5 to 15 percentage.

Rowville Gas Heating Services

• Gas Hot Water System Installation & Repairs Rowville
• Gas Heating Repairs Rowville
• Evaporative Cooling Repair Rowville
• Carbon Monoxide Testing Rowville
• Rowville
• Vulcan Ducted Gas Heating Servicing & Repair Rowville
• Ducted Gas Heating Servicing & Repair Rowville
• Gas Heating Installation Rowville
• Braemar Ducted Gas Heating Servicing & Repair Rowville
• Gas Log Fire Service & Repairs Rowville
• Gas Heating Service Rowville
• Gas Appliance Servicing & Repair Rowville
• Gas Heating Rowville
• Gas Space Heater Repair Rowville

What Types of Systems We Service & Repair

Each type and brand of heating comes with its own maintenance and operation Our skilled technicians have the knowledge and expertise to provide the best service to all systems of heating including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in repairs and maintenance of heating systems, specialising in all styles and types of heating systems. We pride ourselves on a quick response time and commitment to quality, efficiency and reliability.

We can service and maintain the leading brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re Personable & Friendly
• Highly Experienced and Licenced Team
• Get a Quote Without obligation

Our Promise To You

At Melbourne Gas Heating Service we understand the frustration of not having hot water, and it’s something we believe no one should need to go through. That’s why we give top priority on hot water emergencies. Our plumbers are courteous and reliable, without a doubt we can assist you in any situation.

We pride ourselves on the quality of our customer service. It is our firm belief that the small things count the most.

We take pride in our great customer service, Here’s why our clients love us:

• We always show up when we say we will.
• Our experts will give you their number when they’re thirty minutes away.
• Price upfront, competitive and professional advice before we begin the work.
• Always taking care to clean up after us.

At Melbourne Gas Heating Service offer emergency and maintenance services in plumbing, heating, and electrical. If at any time you have any questions regarding our services, and the services we can provide.