Split System Installation Belgrave Heights

Split System Install in Belgrave Heights

There’s nothing better than arriving to your home on a hot 40 degree day activating your split system air-conditioning and within a matter of minutes the house and your family will be cool.

Split system air-conditioning provides this versatility, making them hard to beat. But , just like all heaters or coolers, to ensure they are operating at their peak they should be checked and maintained to the highest standard by experienced professionals. Melbourne Gas Heating Service offers experienced technicians who know your split system air conditioners from top to bottom. They specialise in all makes and models of these units and give you peace of mind that we can get the job done at a professional level.

We provide a range of services that include the following:

• Split System Installation Belgrave Heights
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals is licensed and qualified to complete all types of work. If you’re in search of Split System Installation Belgrave Heights services then contact Local Heating and Cooling Professionals Belgrave Heights today and talk with one of our helpful team members.

How Do Split Systems Work?

Systems for split air conditioners get their name because half of it (condenser) located outside the home, while the other part (fan coil) is located inside. In cooling, warm air in the room is taken in via the fan coil, and then eliminated, resulting in cool air recirculating back into the home. In reverse mode, it allows that the heating system to operate in reverse to provide heat in cold weather.

Air conditioning split systems can be placed in rooms, zones or rooms connected by copper piping to an outdoor unit (condenser). Split air conditioners with multiple heads are able to be fitted for up to nine rooms and just one outdoor unit as well as allowing the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of the top brands for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the summer and winter seasons The annual operating cost is $272.34.

Reduced the Split System Operating Costs

It’s not hard to reduce your running costs with a Split System. Depending on the model that you purchase, and the star rating, you will be able to determine how you’ll save each year. But looking beyond the initial cost and how you use it Split System can help as well.

Tips For Using A Split System

• Set the thermostat between 24C and 26C to cool. Any degree lower than that increases the running cost by 10%..
• Choose the economy option if your split system has one. Ensure that you regularly service your air conditioner.
• Keep the sun’s heat out by closing curtains as well as external blinds during the day. Close all doors and windows in areas that are cooled when you have the split unit running.
• When the split system has been switched off and its cooler outside, open the doors and windows to let the cool air in.
• Insulate your property to help keep warm summer days out and cool inside during winter.
• Dress appropriately for the weather conditions.

Why Select Split Systems?

Air conditioning units mounted in wall are among the most commonly owned by homeowners who own a residential air conditioning system because they’re affordable and simple to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year since it keeps a constant temperature, saves costs (less consumption of energy) and creates a lot less sound when it is utilized. This is accomplished by control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted wall mounted split AC system are most budget option for a small room, apartment or small house because they are relatively inexpensive to purchase (depending on the amount of indoor units you require) and don’t need duct work required.

Independent Temperature Control

Each indoor unit is able to control the room that it is situated within, and each space can have a various temperature.

Air Quality

A lot of HVAC systems that are split come with air filters and humidity control mechanisms which control the amount dust and humidity within a room. This provides those with sensitive skin (children or elderly, asthmatic or allergic customers) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to one outdoor condenser which in turn gives you the peace of mind that you have the most suitable cooling system (in terms of output and physical restrictions) to a specific space.

Split System FAQ

Is a split system similar to the air conditioning?

It is true that Split System is an air conditioning system. However, there are different kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All of them operate by using refrigerant and electricity. They all operate on the same principle but they are different in terms of installation.

What is the time frame to set up a split system air conditioner?

In general the typical AC split installation will take between 3-6 hours. The exact length of time may vary based on a variety of factors, such as the following:

• Location and size of both the outdoor and indoor unit
• The copper pipes are routed between outdoor and indoor units
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of situations the air conditioner is more than 10 years old and has obvious issues with your AC, there is a good possibility that it will be cheaper to replace rather than fix.

To assist you in making the best decision To make the right choice, consult with the staff at ComfyHome to provide you with an honest evaluation of the state of your air conditioner.

What size of split system air conditioner will I require?

A typical measure ratio would be to multiply the size of the room by a ratio of 0.15 in order to determine the power of the unit in Kilowatts.

For a room with a size of 40 square meters, you will have a Split air conditioning system of 6 kW. A unit that can cool the air at 2.5kW is suitable for 10-20 sqm rooms areas.

However, the size of the Split system’s required air conditioning can also be affected by other variables like the room insulation, size of the room, and’ locations.

To make an accurate determination of the needed Split unit size, we suggest that you contact us for a comprehensive analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general an air conditioner is designed to last between 10 and 20 years on average. But this depends on a lot of factors such as the model of the AC and the quality of the installation, the routine maintenance history etc…

It is essential to service the Split System air conditioner on a regular basis to extend its life and increase effectiveness.

Do I need to wash my air conditioner air filter?

According to Daikin Australia, it is strongly recommended to take care to clean your air conditioning filter every 2 weeks to increase the efficiency of your system and possibly reduce energy consumption by 5%-15 percent.

Belgrave Heights Gas Heating Services

• Gas Heating Installation Belgrave Heights
• Gas Heating Belgrave Heights
• Carbon Monoxide Testing Belgrave Heights
• Gas Log Fire Service & Repairs Belgrave Heights
• Braemar Ducted Gas Heating Servicing & Repair Belgrave Heights
• Gas Appliance Servicing & Repair Belgrave Heights
• Evaporative Cooling Repair Belgrave Heights
• Ducted Gas Heating Servicing & Repair Belgrave Heights
• Brivis Ducted Gas Heating Servicing & Repair Belgrave Heights
• Gas Space Heater Repair Belgrave Heights
• Gas Heating Repairs Belgrave Heights
• Gas Heating Service Belgrave Heights
• Belgrave Heights
• Vulcan Ducted Gas Heating Servicing & Repair Belgrave Heights
• Gas Hot Water System Installation & Repairs Belgrave Heights

What Types of Systems We Service & Repair

Each brand and style of heating requires its individual operation and maintenance requirements; our experienced technicians have the knowledge and experience to offer excellent services across all kinds of heaters including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in heating repairs and maintenance, specialising in all styles and brands of heating systems. We pride ourselves on having a rapid response time as well as a commitment to excellence, efficiency and reliability.

We can service and maintain the important brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reviews & Reputation
• We’re personable and friendly
• Professionally trained and licensed team
• Get a Free Quote and No obligation

Our Promise To You

We at Melbourne Gas Heating Service we understand the discomfort of not having hot water, and it’s something that we would never want anyone to suffer through. This is why we place an emphasis on emergencies involving hot water. All of our plumbers are courteous and reliable, without a doubt we are able to assist you in any situation.

We take pride in our customer service and it is our conviction that the small things count the most.

We pride ourselves on our exceptional customer service. this is why our customers love us:

• We will always be there when we say we will.
• Our technicians will give you the number to call them when they are thirty minutes away.
• Upfront competitive pricing and advice prior to the start of the project.
• Always taking care to clean up after our own mess.

The staff at Melbourne Gas Heating Service offer emergency and maintenance services in electrical, plumbing and heating. If you have any questions regarding our services and the products we provide, we are here to help.