Split System Installation Collingwood

Split System Installation in Collingwood

There’s nothing better than arriving to your home on a hot 40-degree day, switching on your split system air conditioning and in just a couple of minutes , your home and your family is cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. Like all heaters and coolers to make sure they’re running optimally, they need to be checked and maintained in a professional manner by qualified professionals. Melbourne Gas Heating Service offers experienced technicians who know your split system air-conditioners in and out. They specialize in all models and models of these units giving you the assurance that we will finish the job to a professional standard.

We offer a wide range of different Split System Installation services which include the following:

• Split System Installation Collingwood
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and certified to handle all kinds of jobs. If you’re searching for split system installation in Collingwood services then contact Local Heating and Cooling Professionals Collingwood today and talk with one of our helpful team members.

How Do Split Systems Function?

Split air conditioning systems are their name because half of this system (condenser) is located outside of the house while the other half (fan coil) is located inside. When it cools, warm air inside the room is taken in through the fan coil before being is then removed, which results in cool air flowing back into the home. In reverse mode, it allows your heat pump operate in reverse to provide heat during colder days.

Systems for split air conditioners can be placed in rooms, areas or even multiple rooms joined by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads can be set up in up to nine rooms and only one outdoor unit, and allow for separate temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the summer and winter months The annual running expense is $272.34.

Reduced Costs of Split Systems Operating Costs

It’s not hard to lower your running expenses with a Split System. Depending on the model you buy, as well as its star rating will determine just how much you’ll save per year. But looking beyond the initial cost and how you utilize Your Split System can help as well.

Guide to Using A Split System

• Set the thermostat to 24C and 26C to cool. Each degree less in summer increases the running cost by approximately 10%..
• Choose the economy option if your split system has one. You should also regularly maintain your air conditioning.
• Keep the sun’s heat out by closing curtains as well as external blinds during the daytime. Close all doors and windows in areas that are cooled when your split systems are running.
• When the split system has been switched off and its cooler outside, you can open doors along with windows, allowing the cool air flow in.
• Insulate your home to keep warm summer days out and cool in the winter months.
• Dress appropriately for the weather.

Why Select A Split System?

Air conditioning units mounted in wall are the most commonly used air conditioning systems for homes because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year since it keeps a constant temperature, saves costs (less consumption of energy) and produces a lesser amount of noise when employed. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted wall mounted split AC models are best affordable option for a one room apartment or small house as they are relatively cheap to buy (depending on the amount of indoor units you need) and do not require necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the room that it is installed in, so each room may have different temperatures.

Air Quality

Many split air conditioning systems include air filtering and humidity control features that control the amount of dust and humidity inside the room. This provides those with sensitive skin (children and elderly, asthmatic or allergic users) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser which provides the peace of mind that you have the best air conditioner (in terms of physical and output constraints) for a particular room.

Split System FAQ

Is a split system similar to an air conditioner?

Absolutely, Split System can be described as an air conditioner system. However, there are different kinds of air conditioning systems. These include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All of them operate using refrigerant and electricity, based on the same principles, however they are different in terms of how they are installed.

What is the time frame to set up a split system air conditioner?

In general the typical split air conditioning system installation will take between 3-6 hours. But, the exact amount of time may vary based on various factors like below;

• Size and location of both outdoor and indoor unit
• The route of copper pipes between indoor and outdoor unit
• Electrical connections from main switchboards to A/C unit

More Split System FAQ's

Do I need to replace or fix my air conditioner?

In most situation the air conditioner is at least 10-years-old and you have evident issues with the A/C, there is a good chance that it’s cheaper to replace then repair.

To help you make the right choice for your needs, contact the experts at ComfyHome to get an honest and accurate assessment of the condition of your AC.

What size of split system air conditioner do I need?

A standard measure ratio would be to multiple the area of the room by a factor of 0.15 in order to determine the power of the measurement unit in kilowatts.

For a room area of 40 square metres, you’ll need a Split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is perfect for rooms with 10-20 square meters. areas.

However, the size of the Split system air conditioning required will also be affected by other factors like how well the insulation is in place, the amount of people residing there and’ locations.

To make an accurate determination of the Split dimension, we recommend you call us for a more detailed analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general, an air conditioner is constructed to last for 10-20 years on average. However, it is contingent on a variety of factors such as the brand of the A/C, quality of the installation, routine service history and more…

It is essential to service the Split System air conditioner on a regular basis for a longer life span and to increase efficiency.

When should I wash my air conditioner’s air filter?

Based on Daikin Australia, it is strongly suggested that you should cleanse your air conditioning filters every two weeks in order to boost the system’s efficiency and potentially reduce energy consumption by 5 to 15%.

Collingwood Gas Heating Services

• Ducted Gas Heating Servicing & Repair Collingwood
• Evaporative Cooling Repair Collingwood
• Collingwood
• Gas Heating Repairs Collingwood
• Gas Appliance Servicing & Repair Collingwood
• Gas Space Heater Repair Collingwood
• Vulcan Ducted Gas Heating Servicing & Repair Collingwood
• Braemar Ducted Gas Heating Servicing & Repair Collingwood
• Gas Log Fire Service & Repairs Collingwood
• Gas Heating Service Collingwood
• Brivis Ducted Gas Heating Servicing & Repair Collingwood
• Gas Hot Water System Installation & Repairs Collingwood
• Gas Heating Collingwood
• Carbon Monoxide Testing Collingwood
• Gas Heating Installation Collingwood

What Types of Systems We Service & Repair

Each model and brand of heating has it’s specific operation and maintenance needs Our highly skilled technicians have the knowledge and know how to provide excellent services across all kinds of heaters which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in repairs and maintenance of heating systems that specialize in all kinds and brands of heating systems. We pride ourselves on having a fast response time and dedication to excellence, efficiency and reliability.

We can service and maintain all important brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reviews & Reputation
• We’re personable and friendly
• A Team of Experienced and Licenced Professionals
• Get a Free Quote and No Costs

Our Promise To You

We at Melbourne Gas Heating Service we understand the discomfort of not having hot water. This is something we believe no one should have to experience. That’s why we give an emphasis on hot water emergencies. Our experienced plumbers are friendly and trustworthy, without a doubt we are able to assist you in all situations.

We are proud of the quality of our customer service. It is our belief that the small things count the most.

We pride ourselves on our exceptional customer service. Here’s why our clients are so happy with us:

• We always show up when we declare that we will.
• Our experts will give you a call when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we start the job.
• Always taking care to clean up after ourselves.

Our company Melbourne Gas Heating Service offer emergency and maintenance services in plumbing, electrical and heating. If you have any questions regarding our services, and the services we can offer, please contact us.