Split System Installation East Melbourne

Split System Install in East Melbourne

There’s nothing more satisfying than coming home on a hot day of 40 degrees and flipping on your split-system air-conditioning and within a matter of minutes the house and your family is cool.

Split system air conditioning offers this the ability to be used in a variety of ways, making them difficult to beat. But , just like all heaters or coolers that are required to run to their maximum they should be serviced and maintained in a professional manner by experienced professionals. Melbourne Gas Heating Service offers experienced technicians who know split system air-conditioners from top to bottom. They specialize in all brands and models offering you confidence that we will finish the job to professional standards.

We offer a wide range of services that comprise the following:

• Split System Installation East Melbourne
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and certified to handle all kinds of work. If you’re searching for [keywords lower] East Melbourne services then contact Local Heating and Cooling Professionals East Melbourne today and talk with one of our helpful team members.

How Do Split Systems Function?

Split air conditioning systems have their name because of half it (condenser) being located outside the house , while the other half (fan coil) is located inside. While cooling, warm air inside the room is absorbed from the fan coil, and then is then removed, which results in cooling air returning to the house. In reverse mode, it allows heating pumps to run in reverse to provide heating on cold winter days.

Split air conditioning systems can be placed in rooms, areas or multiple rooms linked by copper pipe to an outdoor unit (condenser). Multi-head split air conditioning systems can be used in more than nine rooms with just one outdoor unit as well as allowing individual temperature control of each room.

What Are The Running Costs With Split Systems?

One of the most recommended brands that we recommend for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular heating & cooling during the summer and winter seasons, the annual running cost would be measured at $272.34.

Reduced Costs of Split Systems Running Costs

It’s easy to cut down on your operating costs with a Split System. The model you purchase, and it’s respective star rating, you will be able to determine how much you can save annually. However looking beyond the initial cost and how you utilize your Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat to 24C and 26C to cool. Any degree lower than that increases the running cost by about 10%..
• Utilize the economy setting If your split system comes with one. Also, you should regularly check the condition of your air conditioning.
• Make sure that the sun’s heat is kept out by closing curtains as well as external blinds in the morning. Close all doors and windows in areas that are being cooled while your split systems are on.
• If the split system is switched off and its cooler outside, open the doors and windows to let cool air inside.
• Insulate your property to help keep summer heat out and the cold inside in winter.
• Dress appropriately for the weather conditions.

Why Choose Split Systems?

Wall mounted split air conditioning systems are the most frequently used air conditioning systems for homes because they are cost-effective and easy to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year since it keeps an even temperature, helps save costs (less consumption of energy) and produces a lesser amount of noise when used. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted split AC models are most cost-effective option for a single room apartment, small home or even a studio since they are inexpensive to purchase (depending on how many indoor units you need) and they don’t require requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the temperature of the room it is located in, thus each room can have a different temperature.

Air Quality

A lot of split air conditioning systems have air filters and humidity control mechanisms that regulate the amount of dust and humidity in the space. This can provide those with sensitive conditions (children older, asthmatic, or allergic customers) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser which provides satisfaction of having the best air conditioner (in terms of output and physical restrictions) to a specific space.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Absolutely, Split System includes an air-conditioning unit. But, the different types of air conditioning system include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates by using refrigerant and electricity. They all operate on the same principle but they are different in terms of how they are installed.

How long will it take to set up a split system air conditioner?

Generally speaking an individual split system air conditioning installation is expected to be completed in 3-6 hours. The exact length of time may vary based on various factors like below:

• Dimensions and position of both indoor and outdoor unit
• The route of copper pipes between outdoor and indoor units
• Electrical connections from the main switchboards to A/C unit

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of situations, if your air conditioner is over > 10 years of age and there are evident issues with the A/C, there is a good chance that it’s cheaper to replace then repair.

For help in making the best decision To make the right choice, consult with the staff at ComfyHome to get an honest assessment on the condition of your AC.

What size of split system air conditioning will I require?

A common measurement ratio is to multiply the area of the room by a ratio of 0.15 to calculate the necessary power of the unit in kilowatt.

For a room area of 40sqm, you should have a Split air conditioning system of 6 kW. A unit that can cool the air at 2.5kW is perfect for 10 -20 sqm room spaces.

However, the size of the Split system’s air conditioning requirements can be affected by other variables like the insulation in the room, the number of occupants and residents’ location.

For a precise assessment of the necessary Split dimension, we recommend you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general an air conditioner is constructed to last for 10-20 years on average. However, it is contingent on a variety of things like the model of the AC it is installed on, the quality of its installation, regular service history, etc…

It is essential to service your Split System Air Conditioner regularly to prolong lifetime and enhance effectiveness.

What is the best frequency to clean my air conditioner air filter?

According to Daikin Australia, it is strongly recommended to clean your air conditioning filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy consumption by 5 to 15 percent.

East Melbourne Gas Heating Services

• Carbon Monoxide Testing East Melbourne
• Gas Heating Repairs East Melbourne
• Evaporative Cooling Repair East Melbourne
• Gas Log Fire Service & Repairs East Melbourne
• Vulcan Ducted Gas Heating Servicing & Repair East Melbourne
• Gas Space Heater Repair East Melbourne
• Braemar Ducted Gas Heating Servicing & Repair East Melbourne
• Ducted Gas Heating Servicing & Repair East Melbourne
• East Melbourne
• Brivis Ducted Gas Heating Servicing & Repair East Melbourne
• Gas Heating Service East Melbourne
• Gas Hot Water System Installation & Repairs East Melbourne
• Gas Appliance Servicing & Repair East Melbourne
• Gas Heating Installation East Melbourne
• Gas Heating East Melbourne

What Types of Systems We Service & Repair

Each type and brand of heating system has its individual operation and maintenance requirements; our experienced technicians have the insight and experience to offer the best service for all heating systems for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience with heating repair and maintenance with a focus on all models and models of heating systems. We pride ourselves on a quick response time and commitment to quality, efficiency and reliability.

We are able to maintain and service the important brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reputation & Reviews
• We’re friendly and personable.
• Professionally trained and licensed team
• Get a Free Quote and No Costs

Our Promise To You

At Melbourne Gas Heating Service we understand the inconvenience of not having any hot water. This is something we believe no one should need to go through. That’s why we give such a high priority on emergencies with hot water. All of our experienced plumbers are reliable and friendly and without doubt, we are able to assist you in any circumstance.

We pride ourselves on the quality of our customer service. It is our belief that the small things count the most.

We are proud of our outstanding customer service. here’s why our customers love us:

• We will always be there when we tell you we will.
• Our technicians will give you a call when they are thirty minutes away.
• Pricing upfront competitive and guidance before we start the job.
• Always making sure we clean up after our own mess.

At Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, heating, and electrical. If you have questions about our services and the products we can offer, please contact us.