Split System Installation Frankston North

Split System Installation in Frankston North

There’s nothing better than arriving home from a scorching 40-degree day, turning on your split system air conditioning and in just a couple of minutes your house and your family is cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers, to ensure they are operating to their maximum it is essential to have them maintained and maintained in a professional manner by qualified professionals. Melbourne Gas Heating Service offers experienced technicians who know your split system air conditioners from top to bottom. They are experts in all makes and models of these units providing you with confidence that we will finish the job in a professional manner.

We offer a wide range of services that comprise the following:

• Split System Installation Frankston North
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and fully trained for all sorts of tasks. If you are looking for [keywords lower] Frankston North services then contact Local Heating and Cooling Professionals Frankston North today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

The split systems of air conditioning earn their name because half of that system (condenser) being outside the house while the other part (fan coil) is inside. When cooling, the hot air that is inside the room is absorbed via the fan coil before being taken out, resulting into cool air being recirculated back into the home. In reverse mode, it allows the heat pump to run in reverse to provide heating during cold days.

The split system of air conditioning are installed to specific rooms, zones or rooms connected by copper piping connecting to the outdoor unit (condenser). Split air conditioners with multiple heads can be set up for at least nine rooms and only one outdoor unit permitting the control of temperature for each room.

What Are The Ongoing Costs With Split Systems?

One of the most recommended brands that we recommend for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating during the summer and winter seasons The annual operating cost is $272.34.

Lowering Costs of Split Systems Operating Costs

It’s not hard to cut down on your operating costs with the Split System. Depending on the model that you buy, as well as its star rating, you will be able to determine how much you can save annually. However looking beyond the initial price to how you utilize your Split System can help as well.

Guide to Operating A Split System

• Set the thermostat to 24C and 26C to cool. Every degree lower during summer will raise the cost of running by 10%..
• Utilize the economy setting when your split has one. You should also regularly maintain your air conditioner.
• Keep the sun’s heat away by closing curtains as well as external blinds during the daytime. Close doors and windows to areas that are cooled when it is split in operation.
• When the split system has been switched off and its cooler outside, you can open doors along with windows, allowing the cool air inside.
• Insulate your house to block the cool summer air out and keep the heat in the winter months.
• Dress appropriately for the weather.

Why Choose A Split System?

The wall mounted air conditioning system is the most frequently used air conditioning systems for homes because they’re affordable and easily to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year since it keeps an even temperature, helps save costs (less energy consumption) and generates less sound when it is utilized. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted divided AC system are best cost-effective option for a single room or apartment as they are comparatively inexpensive to buy (depending on how many indoor units you require) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit is able to control the area it is located in, thus each room is able to have distinct temperature.

Air Quality

Many AC splits feature air filtering functions and humidity control which regulate the amount of dust and humidity inside the room. This gives sensitive customers (children or elderly, asthmatic or allergic people) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to be connected to a single outdoor condenser which provides the convenience of having the most suitable Air conditioner (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Is a split system the same thing as an air conditioner?

It is true that Split System has an air-conditioning system. There are various kinds of air conditioning systems. It that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates with refrigerant and electricity under the same principles, however they are different in terms of how they are installed.

How long will it take to install a split system air conditioner?

Generally speaking for a single AC split installation will take 3-6 hours. The exact length of time may vary based upon a number of variables, including below:

• The size and location of both outdoor and indoor unit
• The route of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority cases when your air conditioner is more than 10 years old and you have noticeable issues with your A/C there’s a good chance that it could be less expensive to replace it than to repair it.

To help you make the best decision for your needs, speak with the team at ComfyHome for an honest evaluation of the condition of your air conditioner.

What size of split system air conditioning will I require?

A typical measurements ratio is multiply the size of the room by a factor of 0.15 to get the needed power of the unit in Kilowatts.

If you have a room size that is 40 sqm, you’ll have a Split system air conditioning unit of 6 kW. A unit with a cooling capacity of 2.5kW is the ideal size for 10-20 sqm rooms spaces.

The size of the Split system’s air conditioning requirements can also be affected by other variables such as the insulation of the room, the number of occupants and residents’ locations.

To make an accurate determination of the required Split Unit size we suggest that you call us for a more detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general air conditioners are built to last from 10-20 years in the an average. However, this is contingent upon a myriad of things like the brand of the A/C and the quality of the installation, the routine maintenance history etc…

It is crucial to maintain your split system air conditioner on a regular basis to prolong lifetime and enhance efficiency.

What is the best frequency to clean my air conditioner’s filter?

Based on Daikin Australia, it is strongly recommended to clean your air conditioning filters every two weeks in order to boost the system’s efficiency and potentially reduce energy consumption by 5 to 15%.

Frankston North Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Frankston North
• Gas Heating Repairs Frankston North
• Gas Space Heater Repair Frankston North
• Evaporative Cooling Repair Frankston North
• Brivis Ducted Gas Heating Servicing & Repair Frankston North
• Carbon Monoxide Testing Frankston North
• Gas Heating Service Frankston North
• Gas Heating Installation Frankston North
• Ducted Gas Heating Servicing & Repair Frankston North
• Gas Appliance Servicing & Repair Frankston North
• Gas Heating Frankston North
• Vulcan Ducted Gas Heating Servicing & Repair Frankston North
• Gas Hot Water System Installation & Repairs Frankston North
• Gas Log Fire Service & Repairs Frankston North
• Frankston North

What Types of Systems We Service & Repair

Every brand and type of heating comes with its own operation and maintenance Our experienced technicians have the knowledge and know how to provide top-quality services to all systems of heating including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance, specialising in all styles and brands of heating systems. We are proud of our fast response time and dedication to excellence, efficiency and reliability.

We are able to service and maintain the majority of major brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reputation & Reviews
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Get a Free Quote and No Costs

Our Promise To You

At Melbourne Gas Heating Service we understand the inconvenience of not having any hot water. This is something we believe no one should have to experience. This is the reason we place top priority on hot water emergencies. Our plumbers are friendly and trustworthy Without a doubt, we will be able to help you in any circumstance.

We take pride in the quality of our customer service. It is our belief that the little things matter the most.

We pride ourselves on our excellent customer service. Here’s why our clients appreciate us:

• We always show up when we say we will.
• Our techs will give you a their number when they’re thirty minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always taking care to clean up after our own mess.

We at Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, electrical, and heating. If at any time you are unsure about our services or what we can offer, please contact us.