Split System Installation Narre Warren

Split System Installation in Narre Warren

There’s nothing better than coming to your home on a hot 40-degree day, flipping on your split-system air conditioning, and in a matter of minutes your house and family members are cool.

Split system air conditioning offers this the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers to make sure they’re running at their best they must be maintained and maintained at a high level by experienced professionals. Melbourne Gas Heating Service offers experienced technicians that know your split system air-conditioners both inside and outside. They specialize in all brands and models of these units giving you the peace of mind that we will finish the job to professional standards.

We provide a variety of services that include the following:

• Split System Installation Narre Warren
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed to perform all kinds of jobs. If you are looking for split system installation in Narre Warren services then contact Local Heating and Cooling Professionals Narre Warren today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Systems for split air conditioners get their name because of half it (condenser) being located outside the home, while the other half (fan coil) is located inside. When it cools, hot air that is inside the room is taken in by the fan coil, and then is then removed, which results in cooling air returning to the house. The reverse cycle permits that the heating system to operate in reverse in order to provide warmth in cold weather.

Split air conditioning systems are placed in rooms, areas or multiple rooms linked by copper pipe into an outdoor unit (condenser). Split air conditioners with multiple heads can be set up for up to nine rooms using only one outdoor unit, and allowing for an individual temperature control for each room.

What Are The Running Costs With Split Systems?

One of our recommended brands to use for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating during the winter and summer periods, the annual running cost would be measured at $272.34.

The reduction of Costs of Split Systems Operating Costs

It’s not difficult to lower your running expenses with the Split System. Depending on the model that you purchaseand its star rating will determine how you’ll save each year. Beyond the initial price to how you utilize it Split System can help as well.

Guide to Using Split Systems

• Set the thermostat between 24C and 26C for cooling. Any degree lower than that increases the running cost by about 10%..
• Choose the economy option If your split system comes with one and regularly service your air cooling system.
• Keep the sun’s heat out by closing the curtains and exterior blinds in the morning. Close windows and doors to areas that are cooling when your split systems are on.
• If the split system is switched off and its cooler outside, you can open doors as well as windows in order to let cool air flow in.
• Insulate your property to help keep the heat out in summer and inside during winter.
• Dress appropriately for the weather.

Why Choose A Split System?

The wall mounted air conditioning system is the most frequently owned residential air conditioning system since they are inexpensive and easily to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout the year because it maintains the temperature constant, cuts costs (less energy use) and creates a lot less noise when used. This is accomplished by setting the speed of rotation more precisely.

Affordable

Wall mounted wall mounted split AC models are most economical option for a single room apartment or small house because they are relatively inexpensive to buy (depending on the amount of indoor units you’ll need) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to regulate the space it is located in, so each room could have different temperature.

Air Quality

A lot of Split air conditioners feature air filtering functions and humidity control which regulate the amount of dust and humidity within a room. This can provide those with sensitive conditions (children, elderly, asthmatic or allergic customers) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to one outdoor condenser which in turn gives you the convenience of having the perfect cooling system (in terms of output and physical constraints) for a specific room.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Yes, Split System includes an air-conditioning unit. There are various types of air conditioning system include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each of these systems operates on electricity & refrigerant under the same principle, but are different in terms of installation.

How long will it take to install a split-system air conditioner?

Generally speaking the typical split air conditioning system installation should be completed in 3-6 hours. But, the exact amount of time may vary based on a variety of factors, such as below;

• Size and location of both the outdoor and indoor unit
• The route of copper pipes between outdoor and indoor units
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Do I need to replace or fix my cooling system?

In most situation, if your air conditioner is more than 10 years of age and has noticeable issues with your A/C there’s a great chance that it’s cheaper to replace rather than fix.

To assist you in making the right decision It is recommended to consult with the staff at ComfyHome to give you an honest opinion on the state of your air conditioner.

What size of split system air conditioning will I require?

A standard measurement ratio is to multiply the size of the room by a factor of 0.15 to get the needed power of the device in kilowatts.

For a room with a size of 40 square metres, you’ll have a Split system air conditioning unit that is 6 kW. A unit that can cool the air at 2.5kW is suitable for rooms with 10-20 square meters. areas.

The size of the Split system’s required air conditioning is also affected by other factors like the room insulation, amount of people residing there and’ position.

To get an accurate estimate of the required Split dimension, we suggest that you contact us for a comprehensive analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is designed to last between 10 and 20 years on average. However, this is contingent upon a myriad of elements, such as the model of the AC and the quality of the installation, routine service history etc…

It is vital to check the maintenance of the Split System air conditioner on a regular basis to prolong lifetime and enhance effectiveness.

How often should I clean my air conditioner’s air filter?

As per Daikin Australia, it is strongly suggested that you should cleanse your air conditioning filters every two weeks in order to boost the efficiency of the system and decrease your energy use by 5%-15 15%.

Narre Warren Gas Heating Services

• Gas Heating Repairs Narre Warren
• Gas Log Fire Service & Repairs Narre Warren
• Evaporative Cooling Repair Narre Warren
• Carbon Monoxide Testing Narre Warren
• Vulcan Ducted Gas Heating Servicing & Repair Narre Warren
• Gas Appliance Servicing & Repair Narre Warren
• Gas Heating Installation Narre Warren
• Brivis Ducted Gas Heating Servicing & Repair Narre Warren
• Gas Heating Narre Warren
• Gas Hot Water System Installation & Repairs Narre Warren
• Gas Heating Service Narre Warren
• Narre Warren
• Braemar Ducted Gas Heating Servicing & Repair Narre Warren
• Ducted Gas Heating Servicing & Repair Narre Warren
• Gas Space Heater Repair Narre Warren

What Types of Systems We Service & Repair

Each model and brand of heating requires its specific operation and maintenance needs Our highly skilled technicians have the insight and expertise to provide top-quality services for all heating systems including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in the field of heating repairs and maintenance, specialising in all styles and types of heating systems. We pride ourselves on having a rapid response time and dedication to excellence, efficiency and reliability.

We are able to maintain and service the majority of leading brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reviews & Reputation
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Get a Quote Without Obligation

Our Promise To You

At Melbourne Gas Heating Service we understand the discomfort of not having hot water. This is something we don’t think anyone should have to experience. That’s why we give an emphasis for hot water emergencies. All of our experienced plumbers are courteous and reliable Without a doubt, we are able to assist you in any situation.

We are proud of our service to customers and it is our belief that even the small things count the most.

We pride ourselves on our outstanding customer service. and here’s the reason our customers appreciate us:

• We always arrive when we promise to be there.
• Our techs will give you a their number when they’re 30 minutes away.
• Price upfront, competitive and professional advice before we start the job.
• Always getting our hands clean after us.

Our company Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, electrical and heating. If you have questions about our services and the products we offer.