Split System Installation Ringwood

Split System Install in Ringwood

There’s nothing more satisfying than coming to your home on a hot day of 40 degrees and activating your split system air conditioning and in just a couple of seconds, the house and family members are cool.

Split system air conditioning offers this versatility, which makes them tough to beat. However, like all heaters and coolers to make sure they’re running at their peak they must be maintained and maintained in a professional manner by experienced professionals. Melbourne Gas Heating Service offers experienced technicians who know your split system air-conditioners from top to bottom. They specialize in all brands and models of these units providing you with confidence that we can get the job done to a professional standard.

We offer a wide range of services, which include the following:

• Split System Installation Ringwood
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts is licensed and qualified to perform all kinds of tasks. If you’re looking for split system installation in Ringwood services then contact Local Heating and Cooling Professionals Ringwood today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Split air conditioning systems are their name because half of the system (condenser) being outside the house , while the second half (fan coil) is located inside. When it cools, hot air that is inside the room is brought in through the fan coil, and then removed, resulting in cooling air returning to the house. The reverse cycle permits the heat pump to operate in reverse, providing heating on cold winter days.

The split system of air conditioning can be installed to specific rooms, zones or rooms linked by copper pipe connecting to the outdoor unit (condenser). Multiple-headed split-air conditioning units are able to be fitted in more than nine rooms, with just one outdoor unit and allow for an individual temperature control for each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands of Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular heating & cooling during the winter and summer periods The annual operating cost would be measured at $272.34.

Reducing the Split System Running Costs

It’s not difficult to cut down on your operating costs by using a Split System. Based on the model you purchase, and it’s respective star rating will determine just how much you’ll save per year. It is important to look beyond the initial cost to how you utilize your Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat between 24C and 26C to allow for cooling. Every degree lower in summer will raise the cost of running by 10%..
• Make use of the economy setting in the event that your split system is equipped with one. Also, you should regularly check the condition of your air conditioning.
• Keep the sun’s heat away by closing curtains and blinds during the day. Close windows and doors to areas that are cooling when you have the split unit on.
• When the split system is shut off and the cooler outside, open doors as well as windows in order to let cool air flow in.
• Insulate your residence to prevent the summer heat out and the cold in the winter months.
• Dress to suit the weather conditions.

Why Choose Split Systems?

Split air conditioners mounted on walls are the most frequently used air conditioning systems for homes since they are inexpensive and easily to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout the year as it maintains a constant temperature, saves costs (less energy consumption) and produces a lesser amount of sound when it is it is used. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall mounted split AC units are your best economical option for a single room apartment or small house because they are relatively inexpensive to purchase (depending on the number of indoor units you require) and don’t need duct work required.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is located in, which means that each room is able to have different temperature.

Air Quality

A lot of split air conditioning systems include air filters and humidity control mechanisms that regulate the amount of dust and humidity inside the room. This can provide those with sensitive conditions (children, elderly, asthmatic or allergic consumers) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to a single outdoor condenser that in turn provides you with the peace of mind that you have the most suitable Air conditioner (in terms of output and physical limitations) to a specific space.

Split System FAQ

Is a split system similar to the air conditioning?

It is true that Split System includes an air-conditioning unit. There are various kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate on electricity & refrigerant under the same principal but very different in terms of how they are installed.

How long does it take to install a split system air conditioner?

Generally speaking, a single split-system air conditioner installation will last between 3 and 6 hours. However, the exact amount of time may vary based on many factors such as below;

• Location and size of both indoor and outdoor unit
• The routing of copper pipes between the outdoor unit and indoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of situations, if your air conditioner is more than 10-years-old and you have obvious issues with your AC there’s a great possibility that it will be cheaper to replace then repair.

To assist you in making the right decision To make the right choice, talk to the experts at ComfyHome for an honest and accurate assessment of the condition of your air conditioner.

What size of split system air conditioning will I require?

A standard measure ratio would be to multiply the space by a factor of 0.15 to obtain the required power of the unit in Kilowatts.

For a space that is 40 sqm, you’ll need a Split system air conditioning unit of 6 kW. A unit with a cooling capacity of 2.5kW is suitable for rooms with 10-20 square meters. spaces.

However, the size of the Split system’s required air conditioning can be affected by other factors like how well the insulation is in place, the quantity of residents and’ location.

For a precise assessment of the required Split units size we recommend you call us for a more detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years, on average. However, this is contingent upon a myriad of factors such as the model of the AC as well as the quality of the installation, routine service history and so on…

It is crucial to maintain your split system air conditioner regularly for a longer life span and to increase efficiency.

When should I wash my air conditioner air filter?

As per Daikin Australia, it is highly recommended that you clean your air conditioning filters every two weeks in order to boost the system’s efficiency and potentially reduce energy consumption by 5 to 15 15%.

Ringwood Gas Heating Services

• Brivis Ducted Gas Heating Servicing & Repair Ringwood
• Gas Hot Water System Installation & Repairs Ringwood
• Evaporative Cooling Repair Ringwood
• Gas Heating Service Ringwood
• Ringwood
• Gas Heating Ringwood
• Braemar Ducted Gas Heating Servicing & Repair Ringwood
• Gas Space Heater Repair Ringwood
• Carbon Monoxide Testing Ringwood
• Gas Appliance Servicing & Repair Ringwood
• Vulcan Ducted Gas Heating Servicing & Repair Ringwood
• Gas Heating Repairs Ringwood
• Gas Heating Installation Ringwood
• Ducted Gas Heating Servicing & Repair Ringwood
• Gas Log Fire Service & Repairs Ringwood

What Types of Systems We Service & Repair

Each type and brand of heating comes with its specific operation and maintenance needs Our skilled technicians have the insight and expertise to provide top-quality services on all types of heating equipment, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in repairs and maintenance of heating systems and specialize in all types and brands of heating equipment. We take pride in a fast response time and dedication to excellence, efficiency and reliability.

We are able to maintain and service the majority of important brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Get a Quote With No Costs

Our Promise To You

At Melbourne Gas Heating Service we understand the discomfort of not having hot water, and it’s something we don’t think anyone should suffer through. That’s why we give top priority on emergencies with hot water. Our experienced plumbers are reliable and friendly and without doubt, we will be able to help you in any circumstance.

We are proud of the quality of our customer service. It is our belief that the small things count the most.

We pride ourselves on our exceptional customer service. Here’s why our clients are so happy with us:

• We always show up when we say we will.
• Our staff will give you a call when they are thirty minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always cleaning up after us.

We at Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, heating, and electrical. If you have some questions about our services and the products we can provide.