Split System Installation Selby

Split System Install in Selby

There’s nothing more satisfying than coming home on a hot 40 degree day activating your split system air conditioning, and in a matter of minutes your house and your family will be cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers that are required to run at their peak, they need to be maintained and serviced at a high level by experienced professionals. Melbourne Gas Heating Service offers experienced technicians who are familiar with split system air conditioners from top to bottom. They are experts in all makes and models giving you the peace of mind that we will complete the task in a professional manner.

We offer a variety of services that include the following:

• Split System Installation Selby
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts is licensed and qualified to complete all types of tasks. If you’re in search of split system installation in Selby services then contact Local Heating and Cooling Professionals Selby today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

The split systems of air conditioning get their name because half of this system (condenser) located outside the house , while the other half (fan coil) is inside. When it cools, warm air inside the room is brought in through the fan coil, and then is then removed, which results in cool air recirculating back into the house. In reverse mode, it allows heating pumps to operate in reverse in order to provide warmth on cold winter days.

Systems for split air conditioners are installed to specific rooms, zones or rooms connected by copper piping with an outside unit (condenser). Multiple-headed split-air conditioning units can be set up for up to nine rooms and only one outdoor unit, as well as allowing separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of our recommended brands to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter seasons The annual operating cost will be $272.34.

Lowering split system Operating Costs

It’s not difficult to reduce your running costs with a Split System. The model you buy, as well as its star rating will determine how much you’ll save per year. It is important to look beyond the initial cost to the way you use Your Split System can help as well.

Guide to Operating A Split System

• Set the thermostat to 24C and 26C to cool. Any degree lower than that will increase the running costs by approximately 10%..
• Choose the economy option when your split has one and regularly service your air cooling system.
• Keep the sun’s heat out by closing curtains and external blinds during the day. Close all doors and windows in areas that are cooled when you have the split unit operating.
• If the split system is shut off and the cooler outside, it is recommended to open the doors or windows and let cool air circulate.
• Insulate your house to block warm summer days out and cool inside during winter.
• Dress to suit the weather conditions.

Why Select A Split System?

Split air conditioners mounted on walls are the most commonly owned residential air conditioning system since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through all seasons since it ensures the temperature at a constant level, reduces costs (less energy consumption) and generates less noise when utilized. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall mounted split AC systems are the most affordable option for a one room apartment or small house as they are comparatively inexpensive to buy (depending on how many indoor units you’ll need) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is situated in, which means that each room could have different temperatures.

Air Quality

Many AC splits include air filtering and humidity control features which control the amount dust and humidity within the space. This provides those with sensitive skin (children or elderly, asthmatic or allergic consumers) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to be connected to one outdoor condenser, that in turn provides you with the peace of mind that you have the best Air conditioner (in terms of output and physical constraints) for a particular room.

Split System FAQ

Is a split system the same as the air conditioning?

Sure, Split System has an air-conditioning system. There are various kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principle, but are different in terms.

How long does it take to install a split-system air conditioner?

Generally speaking, a single split-system air conditioner installation can take 3-6 hours. However, the exact amount of time may vary based on various factors like below;

• Location and size of both indoor and outdoor unit
• The copper pipes are routed between outdoor and indoor units
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In most situation when your A/C is more than 10 years of age and there are obvious issues with your AC, there is a good chance that it’s cheaper to replace rather than fix.

To help you make the right choice for your needs, talk to the experts at ComfyHome to give you an honest opinion on the state of your air conditioner.

What size of split system air conditioner do I need?

A typical measurements ratio is multiply the room area by a ratio of 0.15 to calculate the necessary power of the measurement unit in kilowatts.

For a space that is 40 sqm, you’ll need a Split air conditioning system of 6 kW. A cooling unit of 2.5kW is perfect for 10 -20 sqm room spaces.

However, the amount of the Split system’s required air conditioning can be affected by other factors like the insulation in the room, the size of the room, and’ place of residence.

For an accurate assessment of the needed Split unit size, we suggest that you contact us for a detailed analysis.

More Split System FAQ's

How long does an air conditioner split system last?

In general an air conditioner is built to last 10-20 years in the average. However, it is contingent on a variety of factors such as the manufacturer of the air conditioner, quality of the installation, routine maintenance history etc…

It is crucial to maintain the Split System air conditioner frequently to prolong lifetime and enhance effectiveness.

Do I need to wash my air conditioner air filter?

In accordance with Daikin Australia, it is strongly recommended to clean your air conditioning filters every two weeks to improve the efficiency of your system and possibly reduce your energy consumption by 5%-15 percentage.

Selby Gas Heating Services

• Brivis Ducted Gas Heating Servicing & Repair Selby
• Ducted Gas Heating Servicing & Repair Selby
• Gas Heating Selby
• Gas Log Fire Service & Repairs Selby
• Gas Appliance Servicing & Repair Selby
• Carbon Monoxide Testing Selby
• Gas Hot Water System Installation & Repairs Selby
• Gas Space Heater Repair Selby
• Braemar Ducted Gas Heating Servicing & Repair Selby
• Gas Heating Service Selby
• Vulcan Ducted Gas Heating Servicing & Repair Selby
• Gas Heating Installation Selby
• Evaporative Cooling Repair Selby

What Types of Systems We Service & Repair

Each type and brand of heating comes with its own maintenance and operation Our highly skilled technicians are equipped with the expertise and know how to provide first rate services across all kinds of heaters, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in the field of heating repairs and maintenance with a focus on all models and brands of heating equipment. We take pride in a quick response time and commitment to quality, efficiency and reliability.

We can service and maintain the majority of top brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reputation & Reviews
• We’re Personable & Friendly
• Experienced & Licenced Team
• Get a Free Quote and No obligation

Our Promise To You

We at Melbourne Gas Heating Service we understand the inconvenience of not having any hot water and it’s something that we would never want anyone to have to experience. This is the reason we place top priority for hot water emergencies. Our plumbers are trustworthy and friendly and without doubt, we can assist you in any situation.

We are proud of our customer service , and it is our conviction that the little things matter the most.

We are proud of our outstanding customer service. Here’s why our clients are so happy with us:

• We always show up when we promise to be there.
• Our technicians will give you their number when they’re 30 minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always cleaning up after our own mess.

The staff at Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, electrical, and heating. If you are unsure about our services and what we can offer, please contact us.