Split System Installation Springvale

Split System Install in Springvale

There’s nothing more satisfying than coming to your home on a hot day of 40 degrees and activating your split system air conditioning and in just a couple of minutes the house and your family is cool.

Split system air conditioning offers this the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers to make sure they’re running at their peak they must be serviced and maintained to the highest standard by qualified professionals. Melbourne Gas Heating Service offers experienced technicians who know your split system air conditioners in and out. They specialize in all brands and models of these units giving you the confidence that we will complete the task in a professional manner.

We offer a variety of services, which include the following:

• Split System Installation Springvale
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are fully qualified and licensed to perform all kinds of work. If you are looking for split system installation Springvale services then contact Local Heating and Cooling Professionals Springvale today and talk with one of our helpful team members.

How Do Split Systems Function?

Systems for split air conditioners are their name because of half the system (condenser) being outside the house while the other portion (fan coil) is located inside. While cooling, hot air that is inside the room is brought in by the fan coil before being is then removed, which results in cooling air returning to the home. While reverse cycle allows for your heat pump run in reverse in order to provide warmth during cold days.

Split air conditioning systems are fitted to individual rooms, areas or multiple rooms connected by copper piping to an outdoor unit (condenser). Systems with multi-head splits are able to be fitted for at least nine rooms and just one outdoor unit as well as allowing an individual temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of our recommended brands of Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating throughout the winter and summer periods, the annual running cost is $272.34.

Lowering the Split System Running Costs

It doesn’t take much to lower your running expenses by using the Split System. Depending on the model you buy, as well as its star rating will determine how you’ll save each year. It is important to look beyond the initial cost and how you make use of Your Split System can help as well.

Guide to Operating A Split System

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Every degree lower in summer will raise the cost of running by about 10%..
• Make use of the economy setting when your split has one. Also, you should regularly check the condition of your air cooling system.
• Make sure that the sun’s heat is kept out by closing the curtains and exterior blinds during the daytime. Close windows and doors to areas being cooled when the split system is in operation.
• If the split system is switched off and its cooler outside, open the doors along with windows, allowing cool air circulate.
• Insulate your home to keep the summer heat out and the cold in during winter.
• Dress according to the weather conditions.

Why Choose A Split System?

Wall mounted split air conditioning systems are the most frequently used residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year because it maintains a constant temperature, saves costs (less energy use) and produces a lesser amount of noise when used. This is achieved through managing the speed of the compressor more precisely.

Affordable

Wall mounted divided AC models are most cost-effective option for a single room apartment or small house because they are relatively inexpensive to buy (depending on the number of indoor units you will require) and there is no installation of ducts.

Independent Temperature Control

Each indoor unit is able to regulate the space it is located in, which means that each room may have different temperature.

Air Quality

Many Split air conditioners come with air filtering and humidity control features that control the amount of dust and humidity that can be found in a room. This allows for sensitive customers (children, elderly, asthmatic or allergic people) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to one outdoor condenser which gives you the comfort of having the perfect AC (in terms of output and physical constraints) to a specific space.

Split System FAQ

Are split systems the same as an air conditioner?

Absolutely, Split System has an air-conditioning system. But, the different types of air conditioning system include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate using refrigerant and electricity, based on the same principle, but are different in terms of installation.

What is the time frame to install a split system air conditioner?

Generally speaking an individual split system air conditioning installation should be completed in 3-6 hours. The exact length of time can vary based on a variety of factors, such as below;

• Location and size of both indoor and outdoor unit
• The copper pipes are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In most situation, if your air conditioner is at least 10 years old and there are noticeable issues with your A/C there’s a good chance that it could be cheaper to replace rather than fix.

For help in making the right choice To make the right choice, talk to the experts at ComfyHome for an honest evaluation of the state of your air conditioner.

What size of split system air conditioning will I require?

A typical measure ratio would be to multiply the room area by a factor of 0.15 to obtain the required power of the unit in kilowatt.

If you have a room size that is 40 sqm, you’ll need a Split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is perfect for rooms with 10-20 square meters. areas.

However, the amount of the Split system’s required air conditioning can also be affected by other variables such as the insulation in the room, the amount of people residing there and’ locations.

To make an accurate determination of the necessary Split dimension, please get in touch with us to request a thorough analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general air conditioners are designed to last between 10 and 20 years, on average. However, it is contingent on a variety of variables, including the model of the AC and the quality of the installation, routine service history and more…

It is essential to service the Split System air conditioner on a regular basis to extend its life and increase efficiency.

What is the best frequency to clean my air conditioner’s filter?

In accordance with Daikin Australia, it is strongly recommended to clean your air conditioning filters every two weeks to improve the system’s efficiency and potentially reduce energy consumption by 5%-15 percent.

Springvale Gas Heating Services

• Gas Heating Springvale
• Gas Log Fire Service & Repairs Springvale
• Evaporative Cooling Repair Springvale
• Gas Heating Installation Springvale
• Carbon Monoxide Testing Springvale
• Brivis Ducted Gas Heating Servicing & Repair Springvale
• Ducted Gas Heating Servicing & Repair Springvale
• Vulcan Ducted Gas Heating Servicing & Repair Springvale
• Gas Heating Service Springvale
• Braemar Ducted Gas Heating Servicing & Repair Springvale
• Gas Space Heater Repair Springvale
• Gas Heating Repairs Springvale
• Gas Hot Water System Installation & Repairs Springvale
• Gas Appliance Servicing & Repair Springvale
• Springvale

What Types of Systems We Service & Repair

Each model and brand of heating comes with its specific operation and maintenance needs Our experienced technicians have the knowledge and expertise to provide the best service for all heating systems for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in repairs and maintenance of heating systems, specialising in all styles and brands of heating systems. We take pride in a quick response time and commitment to excellence, efficiency , and reliability.

We are able to service and maintain the majority of major brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reviews & Reputation
• We’re friendly and personable.
• Highly Experienced and Licenced Team
• Get a Quote Without Obligation

Our Promise To You

We at Melbourne Gas Heating Service we understand the difficulty of not having hot water. It’s a situation we believe no one should need to go through. This is why we put such a high priority for hot water emergencies. All of our experienced plumbers are friendly and trustworthy, without a doubt we can assist you in all situations.

We are proud of our customer service , and it is our firm belief that the minor things matter most.

We pride ourselves on our excellent customer service. this is why our customers appreciate us:

• We always show up when we declare that we will.
• Our technicians will give you a call when they are 30 minutes away.
• Price upfront, competitive and professional advice before we even begin the job.
• Always taking care to clean up after ourselves.

Our company Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, heating, and electrical. If at any time you have any questions regarding our services and the products we can offer, please contact us.