Split System Installation Tremont

Split System Installation in Tremont

There’s nothing better than arriving home from a scorching day of 40 degrees and switching on your split system air conditioning and in a matter of seconds, the house and your family is cool.

Split system air-conditioning offers such flexibility, which makes them difficult to beat. However, like all heaters and coolers that are required to run optimally it is essential to have them maintained and serviced at a high level by skilled professionals. Melbourne Gas Heating Service offers experienced technicians who know split system air conditioners inside and out. They specialise in all makes and models providing you with confidence that we will finish the job in a professional manner.

We provide a range of services that include the following:

• Split System Installation Tremont
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed to perform all kinds of work. If you’re looking for Split System Installation Tremont services then contact Local Heating and Cooling Professionals Tremont today and talk with one of our helpful team members.

How Do Split Systems Function?

Split air conditioning systems are their name due to half this system (condenser) being located outside the house while the other half (fan coil) is installed inside. In cooling, warm air from inside the room is absorbed through the fan coil and removed, resulting in cool air flowing back into the home. In reverse mode, it allows heating pumps to operate in reverse to provide heating in cold weather.

Split air conditioning systems are placed in rooms, zones or rooms linked by copper pipe into an outdoor unit (condenser). Multiple-headed split-air conditioning units can be installed for at least nine rooms with only one outdoor unit, permitting an individual temperature control for each room.

What Are The Running Costs With Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the summer and winter seasons The annual operating cost would be measured at $272.34.

The reduction of the Split System Running Costs

It’s not hard to lower your running expenses with a Split System. Depending on the model that you purchase, and the star rating, you will be able to determine how much you will save each year. However looking beyond the initial cost and how you will use it Split System can help as well.

Tips For Operating A Split System

• Set the thermostat to 24C and 26C for cooling. Every degree lower in summer will raise the cost of running by 10%..
• Make use of the economy setting in the event that your split system is equipped with one. Ensure that you regularly service your air conditioning.
• Keep the sun’s heat out by closing curtains and external blinds in the morning. Close the doors and windows of areas that are being cooled while it is split in operation.
• When the split system has been shut off and the cooler outside, you can open doors along with windows, allowing the cool air circulate.
• Insulate your house to block cool summer air out and keep the heat in the winter months.
• Dress to suit the weather conditions.

Why Select Split Systems?

Split air conditioners mounted on walls are the most commonly used air conditioning systems for homes, as they are affordable and easily to maintain.

Inverter Technology

Inverter technology is the most effective way to enjoy more comfort throughout the year because it maintains a constant temperature, saves costs (less energy consumption) and produces a lesser amount of sound when it is utilized. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall-mounted split AC models are best budget option for a small room or apartment as they are relatively cheap to purchase (depending on how many indoor units you require) and they don’t require installation of ducts.

Independent Temperature Control

Each indoor unit is able to regulate the space it is placed in, so each room can have a distinct temperature.

Air Quality

A lot of split air conditioning systems have air filters and humidity control mechanisms which control the amount dust and humidity inside a room. This provides those with sensitive skin (children and elderly, asthmatic or allergic consumers) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser, which provides the comfort of having the most suitable cooling system (in terms of output and physical constraints) for a specific room.

Split System FAQ

Are split systems the same as an air conditioner?

It is true that Split System is an air conditioning system. However, there are different kinds of air conditioning systems. These which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate on electricity & refrigerant under the same principle, but are different in terms of how they are installed.

How long will it take to install a split system air conditioner?

In general the typical AC split installation can take 3-6 hours. But, the exact amount of time may vary based upon a number of variables, including below;

• Size and location of both indoor and outdoor unit
• The routing of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In most situation in the event that your A/C is more than 10-years-old and has apparent issues with your air conditioner there’s a good likelihood that it is cheaper to replace then repair.

To help you make the best decision for your needs, consult with the staff at ComfyHome for an honest evaluation of the condition of your air conditioner.

What size of split system air conditioner do I need?

A standard measure ratio would be to multiply the size of the room by a factor of 0.15 to obtain the required power of the unit in kilowatt.

If you have a room size of 40sqm, you should need a Split air conditioning system of 6 kW. A cooling unit of 2.5kW is perfect for 10 -20 sqm room areas.

However, the amount of the Split system’s required air conditioning will also be dependent on other factors such as the insulation of the room, the number of occupants and residents’ locations.

To get an accurate estimate of the required Split dimension, we recommend you contact us for a detailed analysis.

More Split System FAQ's

What is the longest a split system air conditioner last?

In general an air conditioner is constructed to last for 10-20 years, on an average. But it depends on heaps of factors such as the brand of the A/C it is installed on, the quality of its installation, regular service history, and more…

It is important to service the Split System air conditioner on a regular basis to prolong lifetime and enhance efficiency.

When should I wash the air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every two weeks to improve the efficiency of the system, and ultimately reduce your energy usage by 5%-15%.

Tremont Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Tremont
• Gas Appliance Servicing & Repair Tremont
• Ducted Gas Heating Servicing & Repair Tremont
• Gas Hot Water System Installation & Repairs Tremont
• Tremont
• Gas Space Heater Repair Tremont
• Gas Log Fire Service & Repairs Tremont
• Vulcan Ducted Gas Heating Servicing & Repair Tremont
• Gas Heating Repairs Tremont
• Evaporative Cooling Repair Tremont
• Gas Heating Service Tremont
• Gas Heating Installation Tremont
• Gas Heating Tremont
• Brivis Ducted Gas Heating Servicing & Repair Tremont
• Carbon Monoxide Testing Tremont

What Types of Systems We Service & Repair

Each type and brand of heating requires its own operation and maintenance Our highly skilled technicians have the insight and know how to provide first rate services across all kinds of heaters, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience with heating repair and maintenance and specialize in all types and brands of heating systems. We are proud of our quick response time and commitment to efficiency, excellence and reliability.

We are able to service and maintain all major brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Great Reviews & Reputation
• We’re personable and friendly
• Highly Experienced and Licenced Team
• Get a Quote Without obligation

Our Promise To You

At Melbourne Gas Heating Service we understand the discomfort of not having hot water and it’s something we believe no one should have to experience. This is why we put an emphasis for hot water emergencies. Our experienced plumbers are courteous and reliable, without a doubt we are able to assist you in any situation.

We are proud of our service to customers and it is our belief that even the tiny things are the most important.

We pride ourselves on our exceptional customer service. here’s why our customers are so happy with us:

• We always show up when we promise to be there.
• Our experts will give you a call when they are thirty minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always taking care to clean up after ourselves.

Our company Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, electrical and heating. If you are unsure about our services or what we provide, we are here to help.