Split System Installation Burwood East

Split System Installation in Burwood East

There’s nothing better than coming home on a hot day and turning on your split system air-conditioning and within a matter of seconds, the house and your family are cool.

Split system air conditioning offers this flexibility, which makes them difficult to beat. Like all heaters and coolers to make sure they’re running to their maximum they must be checked and maintained at a high level by experienced professionals. Melbourne Gas Heating Service offers experienced technicians who know your split system air conditioners both inside and outside. They specialise in all makes and models of these units providing you with confidence that we can get the job done to a professional standard.

We provide a variety of services that include the following:

• Split System Installation Burwood East
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed to handle all kinds of jobs. If you are looking for split system installation in Burwood East services then contact Local Heating and Cooling Professionals Burwood East today and talk with one of our helpful team members.

How Do Split Systems Work?

The split systems of air conditioning have their name because half of the system (condenser) is located outside of the house while the other portion (fan coil) is installed inside. When it cools, hot air that is inside the room is brought in through the fan coil and taken out, resulting into cool air flowing back into the home. While reverse cycle allows for heating pumps to run in reverse to provide heat on cold winter days.

Systems for split air conditioners can be installed in individual rooms, zones or rooms that are connected via copper pipes into an outdoor unit (condenser). Systems with multi-head splits are able to be fitted for up to nine rooms, with only one outdoor unit and allow for separate temperature control for each room.

What Are The Running Costs For Split Systems?

One of the top brands of Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating during the summer and winter time The annual operating cost would be measured at $272.34.

The reduction of the Split System Running Costs

It’s not hard to reduce your running costs by using a Split System. The model you purchaseand its star rating will determine how much you can save annually. But looking beyond the initial price to how you make use of your Split System can help as well.

Guide to Using A Split System

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Every degree lower in summer will increase your running costs by around 10%.
• Use the economy setting If your split system comes with one. Ensure that you regularly service your air conditioning.
• Keep the sun’s heat away by closing curtains as well as external blinds during the daytime. Close doors and windows to areas that are being cooled while your split systems are in operation.
• When the split system has been shut off and the cooler outside, open the doors along with windows, allowing the cool air in.
• Insulate your house to block warm summer days out and cool in the winter months.
• Dress appropriately for the weather conditions.

Why Select Split Systems?

The wall mounted air conditioning system is the most widely used air conditioning systems for homes since they are inexpensive and easily to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year since it keeps a constant temperature, saves costs (less energy consumption) and creates a lot less sound when it is utilized. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall mounted Split AC units are your best cost-effective option for a single room, apartment or small house because they are relatively inexpensive to purchase (depending on the number of indoor units you need) and do not require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is located in, which means that each room may have distinct temperature.

Air Quality

Many HVAC systems that are split come with air filtering and humidity control functions that control the amount of dust and humidity in a room. This gives sensitive customers (children and elderly, asthmatic or allergic customers) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to be connected to one outdoor condenser that in turn provides you with the convenience of having the most suitable air conditioner (in terms of output and physical constraints) for a specific room.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Sure, Split System includes an air-conditioning unit. However, there are many kinds of air conditioning systems. This which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate on electricity & refrigerant under the same principle, but are different in terms of installation.

How long does it take to set up a split system air conditioner?

Generally speaking an individual split system air conditioning installation should be completed in 3-6 hours. The exact length of time could vary based on various factors like below;

• Size and location of both the outdoor and indoor unit
• The routing of copper pipes between indoor and outdoor unit
• Electrical connections from the main switchboard to the A/C unit

More Split System FAQ's

Should I replace or repair my AC unit?

In the majority of situations the air conditioner is over > 10 years old and has obvious issues with your AC There is a high chance that it could be cheaper to replace then repair.

In order to help you make the right decision for your needs, speak with the team at ComfyHome to get an honest opinion on the condition of your air conditioner.

What size of split system air conditioning will I require?

A standard measurements ratio is multiply the room area by a ratio of 0.15 to calculate the necessary power of the device in kilowatts.

For a space of 40 square metres, you’ll need a Split air conditioning system of 6 kW. An air conditioning unit of 2.5kW is suitable for rooms with 10-20 square meters. areas.

However, the amount of the Split system’s air conditioning is also affected by other variables such as the insulation in the room, the number of occupants and residents’ locations.

To make an accurate determination of the required Split units size we suggest that you contact us for a comprehensive analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general air conditioners are constructed to last for 10-20 years, on an average. However, this is contingent upon a myriad of elements, such as the manufacturer of the air conditioner and the quality of the installation, the routine maintenance history etc…

It is vital to check the maintenance of your split system air conditioner regularly for a longer life span and to increase effectiveness.

When should I wash my air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly suggested that you should cleanse your air conditioning filters every two weeks in order to boost the efficiency of the system and decrease your energy use by 5%-15 percentage.

Burwood East Gas Heating Services

• Ducted Gas Heating Servicing & Repair Burwood East
• Carbon Monoxide Testing Burwood East
• Gas Heating Burwood East
• Gas Appliance Servicing & Repair Burwood East
• Gas Hot Water System Installation & Repairs Burwood East
• Gas Space Heater Repair Burwood East
• Gas Log Fire Service & Repairs Burwood East
• Evaporative Cooling Repair Burwood East
• Gas Heating Repairs Burwood East
• Braemar Ducted Gas Heating Servicing & Repair Burwood East
• Gas Heating Service Burwood East
• Vulcan Ducted Gas Heating Servicing & Repair Burwood East
• Burwood East
• Gas Heating Installation Burwood East
• Brivis Ducted Gas Heating Servicing & Repair Burwood East

What Types of Systems We Service & Repair

Every brand and type of heating system has its own operation and maintenance Our highly skilled technicians have the insight and expertise to provide excellent services for all heating systems, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in heating repairs and maintenance that specialize in all kinds and brands of heating equipment. We pride ourselves on a fast response time and dedication to quality, efficiency and reliability.

We can service and maintain all leading brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reputation & Reviews
• We’re friendly and personable.
• Highly Experienced and Licenced Team
• Get a Quote Without obligation

Our Promise To You

We at Melbourne Gas Heating Service we understand the frustration of not having hot water. It’s a situation we don’t think anyone should be forced to endure. This is why we place such a high priority for hot water emergencies. Our experienced plumbers are friendly and trustworthy, without a doubt we can assist you in any situation.

We pride ourselves on our service to customers and it is our firm belief that the minor things matter most.

We pride ourselves on our exceptional customer service. Here’s why our clients love us:

• We always arrive when we declare that we will.
• Our technicians will give you their number when they’re thirty minutes away.
• Upfront competitive pricing and advice prior to the start of the project.
• Always taking care to clean up after ourselves.

We at Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, electrical, and heating. If you have some questions about our services and the products we offer.