Split System Installation Plenty

Split System Install in Plenty

There’s nothing better than coming to your home on a hot 40 degree day switching on your split system air conditioning and in a matter of minutes your house and your family will be cool.

Split system air conditioning offers this flexibility, which makes them difficult to beat. Like all heaters and coolers to keep them running at their best they must be maintained and serviced to a high standard by qualified experts. Melbourne Gas Heating Service offers experienced technicians who are familiar with split system air conditioners from top to bottom. They specialize in all models and models providing you with assurance that we will finish the job to professional standards.

We provide a range of services that comprise the following:

• Split System Installation Plenty
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and certified to complete all types of work. If you’re in search of split system installation in Plenty services then contact Local Heating and Cooling Professionals Plenty today and talk with one of our helpful team members.

How Do Split Systems Operate?

The split systems of air conditioning are the name because of one half of it (condenser) is located outside of the house , while the second part (fan coil) is inside. When it cools, warm air inside the room is absorbed by the fan coil and taken out, resulting into cool air recirculating back into the home. In reverse mode, it allows the heat pump to operate in reverse in order to provide warmth during colder days.

Systems for split air conditioners can be installed in individual rooms, zones or rooms that are connected via copper pipes into an outdoor unit (condenser). Split air conditioners with multiple heads can be used in up to nine rooms, with just one outdoor unit as well as allowing the control of temperature for each room.

What Are The Running Costs With Split Systems?

One of the top brands that we recommend for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the summer and winter seasons and the annual running costs would be $272.34.

Reduced Split System Operating Costs

It doesn’t take much to cut down on your operating costs by using the Split System. Depending on the model that you purchaseand its star rating will determine how much you can save annually. Beyond the initial cost to how you use it Split System can help as well.

Tips For Operating A Split System

• Set the thermostat between 24C and 26C to allow for cooling. Every degree lower during summer will increase the running costs by around 10%.
• Use the economy setting in the event that your split system is equipped with one. Ensure that you regularly service your air conditioner.
• Keep the sun’s heat out by closing curtains and external blinds in the morning. Close doors and windows to areas that are cooled when it is split running.
• When the split system has been shut off and the cooler outside, open the doors as well as windows in order to let cool air inside.
• Insulate your property to help keep the heat out in summer and in the winter months.
• Wear clothes that are appropriate for the weather.

Why Choose Split Systems?

Split air conditioners mounted on walls are the most commonly used residential air conditioning system since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year as it maintains an even temperature, helps save costs (less energy use) and creates a lot less noise when utilized. This is achieved by controlling the compressor rotation speed more precisely.

Affordable

Wall mounted split AC models are most budget option for a small room apartment, small home or even a studio because they are relatively inexpensive to purchase (depending on the number of indoor units you require) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit is able to control the area it is installed in, which means that each room is able to have different temperature.

Air Quality

A lot of Split air conditioners have air filters and humidity control mechanisms that control the amount of dust and humidity that can be found in the space. This can provide those with sensitive conditions (children and elderly, asthmatic or allergic people) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to a single outdoor condenser which gives you the convenience of having the perfect air conditioner (in terms of output and physical limitations) for a particular room.

Split System FAQ

Is a split system the same thing as the air conditioning?

Yes, Split System has an air-conditioning system. But, the different types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates with refrigerant and electricity under the same principles, however they are different in terms of installation.

How long does it take to install a split system air conditioner?

In general the typical AC split installation is expected to take between 3-6 hours. However, the exact amount of time could vary based on a variety of factors, such as below:

• Location and size of both the outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboards to A/C unit

More Split System FAQ's

Should I replace or repair my cooling system?

In most situation the air conditioner is more than 10 years of age and you notice evident issues with the A/C there’s a good chance that it’s less expensive to replace it than to repair it.

To help you make the right choice for your needs, consult with the staff at ComfyHome to give you an honest opinion on the condition of your AC.

What size of split system air conditioning do I need?

A typical measuring ratio will multiply the size of the room by a factor of 0.15 in order to determine the power of the measurement unit in kilowatts.

If you have a room size that is 40 sqm, you’ll require a split system air conditioning unit that is 6 kW. A cooling unit of 2.5kW is suitable for 10 -20 sqm room spaces.

However, the size of the Split system’s air conditioning requirements can also be affected by other factors like the insulation of the room, the quantity of residents and’ location.

For a precise assessment of the required Split units size we suggest that you call us for a more detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years in the average. However, this is contingent upon a myriad of things like the model of the AC as well as the quality of the installation, regular service history, etc…

It is crucial to maintain the Split System air conditioner on a regular basis for a longer life span and to increase efficiency.

What is the best frequency to wash the air conditioner’s air filter?

In accordance with Daikin Australia, it is highly recommended that you clean your air conditioning filters every two weeks in order to boost the efficiency of your system and possibly reduce your energy usage by 5%-15 15%.

Plenty Gas Heating Services

• Carbon Monoxide Testing Plenty
• Gas Log Fire Service & Repairs Plenty
• Gas Appliance Servicing & Repair Plenty
• Vulcan Ducted Gas Heating Servicing & Repair Plenty
• Gas Space Heater Repair Plenty
• Gas Heating Repairs Plenty
• Gas Heating Service Plenty
• Ducted Gas Heating Servicing & Repair Plenty
• Evaporative Cooling Repair Plenty
• Gas Hot Water System Installation & Repairs Plenty
• Brivis Ducted Gas Heating Servicing & Repair Plenty
• Gas Heating Plenty
• Gas Heating Installation Plenty
• Plenty

What Types of Systems We Service & Repair

Each model and brand of heating has it’s individual operation and maintenance requirements Our experienced technicians have the knowledge and know how to provide top-quality services to all systems of heating, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in repairs and maintenance of heating systems with a focus on all models and brands of heating systems. We are proud of our rapid response time as well as a commitment to excellence, efficiency and reliability.

We are able to service and maintain the leading brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re personable and friendly
• Experienced & Licenced Team
• Get a Free Quote and No obligation

Our Promise To You

At Melbourne Gas Heating Service we understand the inconvenience of not having any hot water and it’s something we believe no one should be forced to endure. That’s why we give such a high priority on emergencies involving hot water. All of our experienced plumbers are courteous and reliable We are able to assist you in all situations.

We pride ourselves on our customer service , and it is our belief that the little things matter the most.

We pride ourselves on our great customer service, Here’s why our clients love us:

• We always show up when promise to be there.
• Our techs will give you a a call when they are thirty minutes away.
• Pricing upfront competitive and guidance before we begin the work.
• Always cleaning up after our own mess.

Our company Melbourne Gas Heating Service offer emergency and maintenance services in plumbing, heating, and electrical. If at any time you have some questions about our services and what we can offer, please contact us.