Split System Installation Viewbank

Split System Install in Viewbank

There’s nothing more enjoyable than coming home to a 40-degree day, flipping on your split-system air-conditioning and within a matter of minutes your house and your family are cool.

Split system air conditioning provides such the ability to be used in a variety of ways, making them difficult to beat. Like all heaters and coolers to make sure they’re running at their peak they must be maintained and serviced in a professional manner by experienced professionals. Melbourne Gas Heating Service offers experienced technicians who know your split system air conditioners in and out. They specialize in all brands and models of these units providing you with confidence that we will finish the job in a professional manner.

We offer a variety of services that include the following:

• Split System Installation Viewbank
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts is licensed and qualified to handle all kinds of work. If you’re looking for [keywords lower] Viewbank services then contact Local Heating and Cooling Professionals Viewbank today and talk with one of our helpful team members.

How Do Split Systems Operate?

The split systems of air conditioning have their name because of half this system (condenser) being outside the home, while the other part (fan coil) is installed inside. In cooling, hot air that is inside the room is brought in via the fan coil and taken out, resulting into cooling air returning to the home. In reverse mode, it allows that the heating system to operate in reverse to provide heat during cold days.

Air conditioning split systems can be installed in individual rooms, areas , or rooms joined by copper piping connecting to the outdoor unit (condenser). Multi-head split air conditioning systems can be set up in as many as nine rooms and just one outdoor unit and allowing for an individual temperature control for each room.

What Are The Running Costs For Split Systems?

One of the brands we recommend for Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter seasons and the annual running costs would be measured at $272.34.

Lowering Costs of Split Systems Running Costs

It’s not difficult to cut down on your operating costs with a Split System. Depending on the model you buy, as well as its star rating will determine how much you can save annually. It is important to look beyond the initial cost to the way you use it Split System can help as well.

Tips For Using Split Systems

• Set the thermostat to 24C and 26C to cool. Every degree lower in summer increases the running cost by 10%..
• Choose the economy option in the event that your split system is equipped with one and regularly service your air conditioning.
• Keep the sun’s heat away by closing curtains and external blinds during the daytime. Close windows and doors to areas that are cooling when the split system is running.
• When the split system is switched off , and the cooler outside, you can open doors and windows to let the cool air in.
• Insulate your home to keep heat out in summer and in during winter.
• Dress appropriately for the weather conditions.

Why Choose Split Systems?

Air conditioning units mounted in wall are the most commonly used residential air conditioning system, as they are affordable and easy to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year because it maintains the temperature at a constant level, reduces costs (less consumption of energy) and produces relatively less sound when it is used. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted wall mounted split AC system are most affordable option for a one room or apartment as they are comparatively inexpensive to buy (depending on the number of indoor units you will require) and they don’t require necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the area it is installed within, and each space can have a different temperatures.

Air Quality

A lot of HVAC systems that are split come with air filtering and humidity control functions which control the amount dust and humidity that can be found in the room. This allows for sensitive customers (children and elderly, asthmatic or allergic users) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to a single outdoor condenser which provides the convenience of having the perfect cooling system (in terms of output and physical restrictions) for a specific room.

Split System FAQ

Are split systems the same as the air conditioning?

Absolutely, Split System is an air conditioning system. But, the different kinds of air conditioning systems. This include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate on electricity & refrigerant under the same principle, but are different in term of installation.

How long will it take to set up a split system air conditioner?

Generally speaking, a single split air conditioning system installation should take 3-6 hours. But, the exact amount of time will depend on various factors like below:

• Location and size of both outdoor and indoor unit
• The route of copper pipes between indoor and outdoor unit
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority cases the air conditioner is over > 10 years of age and you have obvious issues with your AC There is a high possibility that it will be cheaper to replace rather than fix.

In order to help you make the right choice It is recommended to contact the experts at ComfyHome for an honest evaluation of the condition of your AC.

What size of split system air conditioner do I need?

A standard measurements ratio is multiply the size of the room by a ratio of 0.15 to obtain the required power of the device in kilowatts.

If you have a room size that is 40 sqm, you’ll need a Split system air conditioning unit of 6 kW. An air conditioning unit of 2.5kW is ideal for rooms with 10-20 square meters. spaces.

The size of the Split system’s air conditioning is also affected by other factors like how well the insulation is in place, the amount of people residing there and’ location.

For a precise assessment of the needed Split dimension, we suggest that you contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years, on average. But this depends on a lot of things like the model of the AC and the quality of the installation, regular service history, etc…

It is essential to service your split system air conditioner often to prolong lifetime and enhance effectiveness.

Do I need to wash my air conditioner’s air filter?

As per Daikin Australia, it is highly recommended that you clean your air conditioning filters every 2 weeks to increase the efficiency of the system and reduce your energy consumption by 5%-15 percent.

Viewbank Gas Heating Services

• Ducted Gas Heating Servicing & Repair Viewbank
• Carbon Monoxide Testing Viewbank
• Gas Appliance Servicing & Repair Viewbank
• Brivis Ducted Gas Heating Servicing & Repair Viewbank
• Viewbank
• Gas Log Fire Service & Repairs Viewbank
• Evaporative Cooling Repair Viewbank
• Braemar Ducted Gas Heating Servicing & Repair Viewbank
• Gas Space Heater Repair Viewbank
• Gas Heating Installation Viewbank
• Vulcan Ducted Gas Heating Servicing & Repair Viewbank
• Gas Heating Viewbank
• Gas Heating Service Viewbank
• Gas Hot Water System Installation & Repairs Viewbank
• Gas Heating Repairs Viewbank

What Types of Systems We Service & Repair

Each model and brand of heating requires its specific operation and maintenance needs Our skilled technicians have the knowledge and experience to offer first rate services across all kinds of heaters, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience with heating repair and maintenance and specialize in all types and types of heating systems. We are proud of our fast response time and dedication to quality, efficiency and reliability.

We are able to maintain and service all important brands of heating units and systems, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re Personable & Friendly
• Experienced & Licenced Team
• Get a Quote With No Costs

Our Promise To You

At Melbourne Gas Heating Service we understand the inconvenience of not having any hot water, and it’s something we do not believe anyone should suffer through. This is why we put top priority on emergencies with hot water. Our experienced plumbers are courteous and reliable We will be able to help you in any circumstance.

We take pride in our service to customers and it is our firm belief that the minor things matter most.

We take pride in our exceptional customer service. Here’s why our clients love us:

• We always show up when say we will.
• Our technicians will give you the number to call them when they are 30 minutes away.
• Price upfront, competitive and professional advice before we even begin the job.
• Always taking care to clean up after our own mess.

The staff at Melbourne Gas Heating Service offer emergency and maintenance services in electrical, plumbing and heating. If at any time you have some questions about our services or what we provide, we are here to help.