Split System Installation Warranwood

Split System Install in Warranwood

There’s nothing better than arriving home to a day of 40 degrees and turning on your split system air conditioning, and in a matter of minutes your house and family members are cool.

Split system air conditioning provides such flexibility, which makes them difficult to beat. Like all heaters and coolers that are required to run at their peak it is essential to have them checked and maintained to a high standard by skilled professionals. Melbourne Gas Heating Service offers experienced technicians who know your split system air-conditioners in and out. They specialize in all brands and models of these units giving you the assurance that we will complete the task to professional standards.

We provide a variety of services that comprise the following:

• Split System Installation Warranwood
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed to perform all kinds of jobs. If you are looking for split system installation in Warranwood services then contact Local Heating and Cooling Professionals Warranwood today and talk with one of our helpful team members.

How Do Split Systems Operate?

Systems for split air conditioners earn their name due to half the system (condenser) being located outside the house , while the other part (fan coil) is installed inside. While cooling, warm air inside the room is drawn in by the fan coil before being removed, resulting in cool air being recirculated back into the home. The reverse cycle permits heating pumps to run in reverse to provide heat during colder days.

The split system of air conditioning are installed in individual rooms, areas or multiple rooms linked by copper pipe with an outside unit (condenser). Multi-head split air conditioning systems can be set up for at least nine rooms with only one outdoor unit and allowing for separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of our recommended brands that we recommend for Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the winter and summer periods The annual operating cost would be measured at $272.34.

Reducing Split System Operating Costs

It doesn’t take much to cut down on your operating costs by using a Split System. Depending on the model you purchaseand its star rating will determine just how you’ll save each year. Beyond the initial cost to how you use your Split System can help as well.

Tips For Operating A Split System

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Every degree lower during summer increases the running cost by 10%..
• Choose the economy option if your split system has one. Ensure that you regularly service your air conditioner.
• Keep the sun’s heat away by closing curtains and blinds during the daytime. Close windows and doors to areas that are being cooled while you have the split unit operating.
• If the split system is switched off and its cooler outside, it is recommended to open the doors along with windows, allowing the cool air flow in.
• Insulate your house to block the heat out in summer and inside during winter.
• Dress to suit the weather conditions.

Why Select Split Systems?

Air conditioning units mounted in wall are the most widely used air conditioning systems for homes because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year since it keeps an even temperature, helps save costs (less energy consumption) and produces relatively less sound when it is it is used. This is achieved by managing the speed of the compressor more precisely.

Affordable

Wall-mounted Split AC systems are the most economical option for a single room apartment or small house since they are inexpensive to buy (depending on how many indoor units you’ll need) and there is no duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the area it is installed within, and each space can have a different temperature.

Air Quality

Many split air conditioning systems have air filtering functions and humidity control which regulate the amount of dust and humidity in the space. This can provide those with sensitive conditions (children, elderly, asthmatic or allergic users) an unwinding mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to a single outdoor condenser that in turn provides you with the comfort of having the ideal air conditioner (in terms of physical and output constraints) for a particular room.

Split System FAQ

Are split systems the same thing as the air conditioning?

It is true that Split System is an air conditioning system. However, there are different kinds of air conditioning systems. These includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All these systems operate using refrigerant and electricity, based on the same principle but they are different in term of installation.

What is the time frame to install a split system air conditioner?

Generally speaking, a single split air conditioning system installation will take between 3-6 hours. The exact length of time can vary based upon a number of variables, including below;

• The size and location of both indoor and outdoor unit
• The copper pipes are routed between the outdoor unit and indoor unit
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Do I need to replace or fix my cooling system?

In most situation the air conditioner is at least 10 years old and you have obvious issues with your AC there’s a good chance that it’s more affordable to replace than repair.

In order to help you make the right choice To make the right choice, contact the experts at ComfyHome to provide you with an honest and accurate assessment of the state of your air conditioner.

What size split system air conditioning do I need?

The standard measurements ratio is multiple the space by a ratio of 0.15 to get the needed power of the device in kilowatts.

If you have a room size of 40 square meters, you will need a Split air conditioning system of 6 kW. An air conditioning unit of 2.5kW is the ideal size for 10-20 square meter room spaces.

However, the amount of the Split system’s air conditioning will also be affected by other factors like the insulation in the room, the amount of people residing there and’ position.

To make an accurate determination of the required Split units size we suggest you contact us for a detailed analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is designed to last between 10 and 20 years in the an average. However, this is contingent upon a myriad of elements, such as the manufacturer of the air conditioner it is installed on, the quality of its installation, routine service history and more…

It is important to service your split system air conditioner regularly for a longer life span and to increase effectiveness.

Do I need to wash my air conditioner’s filter?

According to Daikin Australia, it is highly recommended that you wash your air conditioner’s filters every two weeks in order to boost the efficiency of your system and possibly decrease your energy use by 5 to 15 percent.

Warranwood Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Warranwood
• Gas Hot Water System Installation & Repairs Warranwood
• Carbon Monoxide Testing Warranwood
• Gas Heating Service Warranwood
• Gas Heating Installation Warranwood
• Gas Space Heater Repair Warranwood
• Gas Heating Warranwood
• Gas Heating Repairs Warranwood
• Vulcan Ducted Gas Heating Servicing & Repair Warranwood
• Gas Appliance Servicing & Repair Warranwood
• Brivis Ducted Gas Heating Servicing & Repair Warranwood
• Warranwood
• Ducted Gas Heating Servicing & Repair Warranwood
• Evaporative Cooling Repair Warranwood
• Gas Log Fire Service & Repairs Warranwood

What Types of Systems We Service & Repair

Every brand and type of heating system has its own operation and maintenance Our highly skilled technicians are equipped with the expertise and know how to provide top-quality services to all systems of heating, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance and specialize in all types and models of heating systems. We pride ourselves on having a fast response time and dedication to efficiency, excellence and reliability.

We are able to maintain and service the leading brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reviews & Reputation
• We’re friendly and personable.
• Experienced & Licenced Team
• Get a Quote Without Costs

Our Promise To You

At Melbourne Gas Heating Service we understand the frustration of not having hot water and it’s something we do not believe anyone should have to experience. This is the reason we place such a high priority for hot water emergencies. All of our plumbers are courteous and reliable and without doubt, we are able to assist with any emergency.

We take pride in our service to customers and it is our firm belief that the minor things matter most.

We pride ourselves on our excellent customer service. this is why our customers love us:

• We always show up when declare that we will.
• Our techs will give you a their number when they’re thirty minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always getting our hands clean after ourselves.

We at Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, electrical and heating. If you are unsure about our services or what we provide, we are here to help.