Split System Installation Wattle Glen

Split System Install in Wattle Glen

There’s nothing better than arriving home on a hot 40-degree day, switching on your split system air conditioning and in just a couple of minutes your house and family members are cool.

Split system air conditioning provides such the ability to be used in a variety of ways, making them difficult to beat. Like all heaters and coolers to make sure they’re running optimally they should be serviced and maintained to the highest standard by qualified professionals. Melbourne Gas Heating Service offers experienced technicians that know your split system air-conditioners both inside and outside. They specialise in all makes and models offering you confidence that we will complete the task to a professional standard.

We offer a wide range of services that comprise the following:

• Split System Installation Wattle Glen
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and fully trained to handle all kinds of work. If you’re looking for split system installation Wattle Glen services then contact Local Heating and Cooling Professionals Wattle Glen today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Systems for split air conditioners earn their name because of half the system (condenser) located outside the house , while the second half (fan coil) is located inside. In cooling, warm air from inside the room is taken in from the fan coil and is then removed, which results in cool air being recirculated back into the house. The reverse cycle permits the heat pump to run in reverse to provide heat during cold days.

Air conditioning split systems are fitted to individual rooms, areas or multiple rooms linked by copper pipe into an outdoor unit (condenser). Systems with multi-head splits can be set up in at least nine rooms with just one outdoor unit and allowing for separate temperature control for each room.

What Are The Running Costs For Split Systems?

One of the top brands of Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the summer and winter time, the annual running cost would be $272.34.

Reducing Costs of Split Systems Operating Costs

It doesn’t take much to reduce your running costs with the Split System. The model you buy, as well as its star rating will determine just how much you will save each year. However looking beyond the initial cost to the way you use your Split System can help as well.

Guide to Using A Split System

• Set the thermostat between 24C and 26C to allow for cooling. Every degree lower in summer increases the running cost by approximately 10%..
• Utilize the economy setting if your split system has one. Ensure that you regularly service your air conditioner.
• Keep the sun’s heat out by closing the curtains and exterior blinds during the daytime. Close doors and windows to areas that are cooled when the split system is on.
• If the split system is shut off and the cooler outside, open the doors and windows to let the cool air inside.
• Insulate your home to keep summer heat out and the cold inside during winter.
• Wear clothes that are appropriate for the weather.

Why Choose A Split System?

Air conditioning units mounted in wall are the most widely used residential air conditioning system, as they are affordable and easily to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year because it maintains the temperature at a constant level, reduces costs (less consumption of energy) and produces relatively less noise when it is used. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall-mounted divided AC models are most affordable option for a one room or apartment as they are comparatively inexpensive to buy (depending on the amount of indoor units you will require) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit is able to control the temperature of the room it is situated in, which means that each room can have a distinct temperature.

Air Quality

A lot of HVAC systems that are split have air filtering and humidity control features that control the amount of dust and humidity in the space. This gives sensitive customers (children or elderly, asthmatic or allergic people) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to one outdoor condenser, which in turn gives you the peace of mind that you have the most suitable Air conditioner (in terms of physical and output constraints) for a particular room.

Split System FAQ

Is a split system similar to one would expect from an air conditioner?

Yes, Split System can be described as an air conditioner system. However, there are many types of air conditioning system that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each of these systems operates using refrigerant and electricity, based on the same principle, but are different in terms of how they are installed.

How long does it take to install a split-system air conditioner?

In general for a single split air conditioning system installation can take between 3-6 hours. The exact length of time could vary based on various factors like below:

• Dimensions and position of both the outdoor and indoor unit
• Copper pipes that are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboard up to the AC unit

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority cases in the event that your A/C is more than 10 years of age and has obvious issues with your AC, there is a good chance that it could be more affordable to replace than repair.

In order to help you make the best decision for your needs, speak with the team at ComfyHome to get an honest opinion on the condition of your AC.

What size of split system air conditioning will I require?

The standard measuring ratio will multiple the room area by a factor of 0.15 to obtain the required power of the device in kilowatts.

For a room with a size of 40 square metres, you’ll have a Split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is suitable for rooms with 10-20 square meters. spaces.

However, the amount of the Split system’s required air conditioning can also be affected by other factors like the room insulation, amount of people residing there and’ location.

To get an accurate estimate of the needed Split dimension, we recommend you contact us for a detailed analysis.

More Split System FAQ's

How long will a split system air conditioner last?

In general an air conditioner is constructed to last for 10-20 years on average. But this depends on a lot of elements, such as the manufacturer of the air conditioner, quality of the installation, regular service history, and so on…

It is essential to service your Split System Air Conditioner on a regular basis to prolong lifetime and enhance effectiveness.

Do I need to clean my air conditioner air filter?

In accordance with Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every two weeks to improve the efficiency of the system and reduce your energy usage by 5 to 15%.

Wattle Glen Gas Heating Services

• Wattle Glen
• Gas Heating Repairs Wattle Glen
• Brivis Ducted Gas Heating Servicing & Repair Wattle Glen
• Vulcan Ducted Gas Heating Servicing & Repair Wattle Glen
• Evaporative Cooling Repair Wattle Glen
• Gas Hot Water System Installation & Repairs Wattle Glen
• Gas Appliance Servicing & Repair Wattle Glen
• Carbon Monoxide Testing Wattle Glen
• Ducted Gas Heating Servicing & Repair Wattle Glen
• Braemar Ducted Gas Heating Servicing & Repair Wattle Glen
• Gas Log Fire Service & Repairs Wattle Glen
• Gas Heating Service Wattle Glen
• Gas Heating Wattle Glen
• Gas Space Heater Repair Wattle Glen
• Gas Heating Installation Wattle Glen

What Types of Systems We Service & Repair

Every brand and type of heating system has its individual operation and maintenance requirements Our skilled technicians are equipped with the expertise and experience to offer top-quality services on all types of heating equipment including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in repairs and maintenance of heating systems with a focus on all models and brands of heating equipment. We are proud of our quick response time and commitment to quality, efficiency and reliability.

We are able to service and maintain all leading brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re personable and friendly
• Professionally trained and licensed team
• Request a Quote with No obligation

Our Promise To You

We at Melbourne Gas Heating Service we understand the inconvenience of not having any hot water, and it’s something we believe no one should be forced to endure. That’s why we give such a high priority on emergencies involving hot water. All of our experienced plumbers are trustworthy and friendly, without a doubt we will be able to assist with any emergency.

We take pride in the quality of our customer service. It is our conviction that the tiny things are the most important.

We take pride in our excellent customer service. here’s why our customers are so happy with us:

• We always show up when tell you we will.
• Our techs will give you a an appointment when they are 30 minutes away.
• Price upfront, competitive and professional advice prior to the start of the project.
• Always making sure we clean up after our own mess.

We at Melbourne Gas Heating Service offer emergency and maintenance services in plumbing, heating, and electrical. If at any time you have questions about our services, and the services we can offer, please contact us.