Split System Installation Fitzroy

Split System Installation in Fitzroy

There’s nothing more enjoyable than coming to your home on a hot day of 40 degrees and switching on your split system air-conditioning and within a matter of minutes , your home and your family are cool.

Split system air conditioning provides such versatility, making them hard to beat. However, like all heaters and coolers, to ensure they are operating to their maximum they should be serviced and maintained in a professional manner by skilled professionals. Melbourne Gas Heating Service offers experienced technicians that know your split system air-conditioners both inside and outside. They are experts in all makes and models offering you peace of mind that we are able to complete the task to a professional standard.

We provide a variety of services, which include the following:

• Split System Installation Fitzroy
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are fully qualified and licensed to perform all kinds of work. If you’re searching for split system installation in Fitzroy services then contact Local Heating and Cooling Professionals Fitzroy today and talk with one of our helpful team members.

How Do Split Systems Operate?

The split systems of air conditioning are their name due to half the system (condenser) is located outside of the house , while the other part (fan coil) is located inside. In cooling, warm air inside the room is drawn in from the fan coil, and then taken out, resulting into cooling air returning to the house. The reverse cycle permits heating pumps to run in reverse to provide heat on cold winter days.

Air conditioning split systems can be placed in rooms, zones or rooms connected by copper piping connecting to the outdoor unit (condenser). Multi-head split air conditioning systems can be installed in at least nine rooms and only one outdoor unit, permitting individual temperature control of each room.

What Are The Ongoing Costs For Split Systems?

One of our recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the summer and winter time and the annual running costs would be measured at $272.34.

The reduction of Costs of Split Systems Running Costs

It’s not difficult to reduce your running costs with a Split System. Depending on the model you purchaseand its star rating, you will be able to determine how much you can save annually. But looking beyond the initial cost and how you use the Split System can help as well.

Tips For Using A Split System

• Set the thermostat between 24C and 26C to cool. Every degree lower in summer increases the running cost by 10%..
• Choose the economy option in the event that your split system is equipped with one. Ensure that you regularly service your air cooling system.
• Keep the sun’s heat out by closing curtains and external blinds during the daytime. Close the doors and windows of areas being cooled when you have the split unit running.
• When the split system has been shut off and the cooler outside, it is recommended to open the doors along with windows, allowing the cool air in.
• Insulate your property to help keep the cool summer air out and keep the heat inside during winter.
• Wear clothes that are appropriate for the weather.

Why Select A Split System?

Split air conditioners mounted on walls are the most commonly owned by homeowners who own a residential air conditioning system, as they are affordable and easy to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout all seasons since it ensures the temperature at a constant level, reduces costs (less energy use) and creates a lot less noise when it is used. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall mounted wall mounted split AC models are most budget option for a small room apartment or small house as they are comparatively inexpensive to purchase (depending on how many indoor units you need) and do not require installation of ducts.

Independent Temperature Control

Each indoor unit is able to control the room that it is placed in, so each room could have distinct temperature.

Air Quality

A lot of Split air conditioners have air filtering and humidity control functions that regulate the amount of dust and humidity inside the space. This allows for sensitive customers (children or elderly, asthmatic or allergic customers) an unwinding mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to a single outdoor condenser which provides the peace of mind that you have the most suitable cooling system (in terms of physical and output constraints) to a specific space.

Split System FAQ

Is a split system the same as an air conditioner?

Yes, Split System can be described as an air conditioner system. There are various kinds of air conditioning systems. It which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate using refrigerant and electricity, based on the same principle, but are different in terms of how they are installed.

How long will it take to set up a split system air conditioner?

In general, a single split air conditioning system installation is expected to take 3-6 hours. But, the exact amount of time could vary based on a variety of factors, such as the following:

• Size and location of both the outdoor and indoor unit
• Copper pipes that are routed between the outdoor unit and the indoor unit
• Electrical connections from the main switchboards to A/C unit

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority cases when your air conditioner is more than 10 years and you notice noticeable issues with your A/C there’s a great possibility that it will be less expensive to replace it than to repair it.

To assist you in making the right decision To make the right choice, consult with the staff at ComfyHome to give you an honest and accurate assessment of the state of your air conditioner.

What size of split system air conditioning do I need?

A typical measurement ratio is to multiple the area of the room by a ratio of 0.15 to obtain the required power of the unit in kilowatt.

For a room area of 40 square metres, you’ll need a Split system air conditioning unit of 6 kW. A cooling unit of 2.5kW is the ideal size for 10 -20 sqm room areas.

However, the amount of the Split system’s required air conditioning can be affected by other factors like the insulation in the room, the size of the room, and’ place of residence.

For an accurate assessment of the necessary Split Unit size we suggest that you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long will a split system air conditioner last?

In general an air conditioner is built to last from 10-20 years, on average. However, this is contingent upon a myriad of elements, such as the model of the AC as well as the quality of the installation, regular service history, and more…

It is important to service your Split System Air Conditioner frequently to extend its lifespan and improve effectiveness.

Do I need to wash the air conditioner’s air filter?

As per Daikin Australia, it is strongly recommended that you take care to clean your air conditioning filter every two weeks in order to boost the efficiency of the system, and ultimately reduce energy consumption by 5 to 15 percentage.

Fitzroy Gas Heating Services

• Gas Heating Repairs Fitzroy
• Gas Appliance Servicing & Repair Fitzroy
• Braemar Ducted Gas Heating Servicing & Repair Fitzroy
• Gas Heating Fitzroy
• Vulcan Ducted Gas Heating Servicing & Repair Fitzroy
• Evaporative Cooling Repair Fitzroy
• Gas Hot Water System Installation & Repairs Fitzroy
• Carbon Monoxide Testing Fitzroy
• Gas Heating Installation Fitzroy
• Fitzroy
• Gas Heating Service Fitzroy
• Ducted Gas Heating Servicing & Repair Fitzroy
• Gas Log Fire Service & Repairs Fitzroy
• Gas Space Heater Repair Fitzroy
• Brivis Ducted Gas Heating Servicing & Repair Fitzroy

What Types of Systems We Service & Repair

Every brand and type of heating system has its specific operation and maintenance needs Our experienced technicians are knowledgeable and experience to offer first rate services across all kinds of heaters, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in heating repairs and maintenance with a focus on all models and models of heating systems. We take pride in a rapid response time and dedication to efficiency, excellence and reliability.

We service and maintain the top brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Get a Quote Without Obligation

Our Promise To You

At Melbourne Gas Heating Service we understand the difficulty of not having hot water. This is something we do not believe anyone should have to experience. This is the reason we place an emphasis on emergencies involving hot water. All of our plumbers are friendly and trustworthy and without doubt, we can assist with any emergency.

We take pride in the quality of our customer service. It is our belief that the minor things matter most.

We pride ourselves on our exceptional customer service. Here’s why our clients are so happy with us:

• We always show up when declare that we will.
• Our staff will give you an appointment when they are thirty minutes away.
• Pricing upfront competitive and guidance prior to the start of the project.
• Always taking care to clean up after us.

We at Melbourne Gas Heating Service offer emergency and maintenance services in electrical, plumbing and heating. If you have any questions regarding our services and the products we can provide.