Split System Installation Pakenham

Split System Installation in Pakenham

There’s nothing better than arriving home to a 40 degree day flipping on your split-system air-conditioning and within a matter of minutes your house and your family is cool.

Split system air conditioning provides such versatility, making them hard to beat. But like all heaters and coolers that are required to run at their best it is essential to have them checked and maintained to a high standard by qualified experts. Melbourne Gas Heating Service offers experienced technicians who are familiar with split system air conditioners from top to bottom. They specialise in all makes and models of these units and give you peace of mind that we can get the job done to a professional standard.

We provide a variety of different Split System Installation services which include the following:

• Split System Installation Pakenham
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling is licensed and qualified to complete all types of tasks. If you are looking for split system installation in Pakenham services then contact Local Heating and Cooling Professionals Pakenham today and talk with one of our helpful team members.

How Do Split Systems Work?

The split systems of air conditioning have their name because of half that system (condenser) being located outside the home, while the other part (fan coil) is inside. In cooling, warm air in the room is drawn in by the fan coil and taken out, resulting into cool air recirculating back into the house. Reverse cycle allows your heat pump operate in reverse in order to provide warmth during colder days.

Systems for split air conditioners can be installed to specific rooms, areas or multiple rooms connected by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads can be used for as many as nine rooms using only one outdoor unit as well as allowing an individual temperature control for each room.

What Are The Running Costs For Split Systems?

One of the top brands that we recommend for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular heating & cooling during the winter and summer periods and the annual running costs is $272.34.

The reduction of split system Running Costs

It’s not difficult to cut down on your operating costs by using a Split System. Depending on the model you purchaseand its star rating will determine how much you can save annually. It is important to look beyond the initial price to how you use Your Split System can help as well.

Tips For Using Split Systems

• Set the thermostat to 24C and 26C to cool. Every degree lower in summer will increase the running costs by around 10%.
• Make use of the economy setting when your split has one and regularly service your air conditioning.
• Keep the sun’s heat away by closing curtains and external blinds in the morning. Close doors and windows to areas that are being cooled while your split systems are running.
• If the split system is turned off and the cooler is outside, it is recommended to open the doors and windows to let the cool air circulate.
• Insulate your house to block the summer heat out and the cold inside during winter.
• Dress to suit the weather.

Why Select A Split System?

Wall mounted split air conditioning systems are the most commonly owned by homeowners who own a residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year as it maintains a constant temperature, saves costs (less consumption of energy) and creates a lot less sound when it is used. This is achieved through control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted split AC systems are the most affordable option for a one room apartment, small home or even a studio since they are inexpensive to buy (depending on the number of indoor units you will require) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is placed within, and each space is able to have various temperature.

Air Quality

A lot of HVAC systems that are split have air filtering functions and humidity control that control the amount of dust and humidity inside the room. This gives sensitive customers (children older, asthmatic, or allergic people) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser, which provides satisfaction of having the ideal AC (in terms of output and physical limitations) to a specific space.

Split System FAQ

Are split systems the same thing as an air conditioner?

Absolutely, Split System is an air conditioning system. However, there are many types of air conditioning system includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates on electricity & refrigerant under the same principle but they are different in terms of how they are installed.

How long will it take to install a split-system air conditioner?

In general, a single split air conditioning system installation can take between 3-6 hours. The exact length of time will depend on a variety of factors, such as below;

• Size and location of both indoor and outdoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from the main switchboards to A/C unit

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of cases when your air conditioner is more than 10 years and you notice obvious issues with your AC there’s a good chance that it’s cheaper to replace then repair.

To assist you in making the best decision It is recommended to speak with the team at ComfyHome for an honest opinion on the condition of your AC.

What size split system air conditioning do I need?

The standard measurement ratio is to multiple the space by a factor of 0.15 in order to determine the power of the measurement unit in kilowatts.

For a space of 40 square meters, you will require a split system air conditioning unit of 6 kW. A unit that can cool the air at 2.5kW is perfect for 10 -20 sqm room areas.

The size of the Split system air conditioning required can be affected by other variables such as how well the insulation is in place, the size of the room, and’ place of residence.

To make an accurate determination of the necessary Split dimension, we suggest that you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years, on an average. But this depends on a lot of elements, such as the brand of the A/C, quality of the installation, routine service history etc…

It is crucial to maintain Your Split System AC frequently to prolong lifetime and enhance efficiency.

When should I wash my air conditioner air filter?

In accordance with Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy usage by 5%-15 percentage.

Pakenham Gas Heating Services

• Gas Heating Repairs Pakenham
• Gas Log Fire Service & Repairs Pakenham
• Pakenham
• Gas Heating Installation Pakenham
• Ducted Gas Heating Servicing & Repair Pakenham
• Gas Heating Pakenham
• Gas Space Heater Repair Pakenham
• Braemar Ducted Gas Heating Servicing & Repair Pakenham
• Vulcan Ducted Gas Heating Servicing & Repair Pakenham
• Evaporative Cooling Repair Pakenham
• Carbon Monoxide Testing Pakenham
• Gas Hot Water System Installation & Repairs Pakenham
• Gas Heating Service Pakenham
• Gas Appliance Servicing & Repair Pakenham
• Brivis Ducted Gas Heating Servicing & Repair Pakenham

What Types of Systems We Service & Repair

Each model and brand of heating has it’s own maintenance and operation Our experienced technicians are equipped with the expertise and expertise to provide first rate services across all kinds of heaters which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience with heating repair and maintenance, specialising in all styles and models of heating systems. We take pride in a fast response time and dedication to quality, efficiency and reliability.

We service and maintain the majority of important brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Get a Quote Without Obligation

Our Promise To You

We at Melbourne Gas Heating Service we understand the discomfort of not having hot water. This is something we do not believe anyone should have to experience. This is why we put top priority on emergencies with hot water. Our experienced plumbers are friendly and trustworthy We will be able to help you in any situation.

We pride ourselves on the quality of our customer service. It is our conviction that the tiny things are the most important.

We are proud of our outstanding customer service. and here’s the reason our customers love us:

• We always show up when tell you we will.
• Our staff will give you an appointment when they are 30 minutes away.
• Pricing upfront competitive and guidance before we begin the work.
• Always getting our hands clean after our own mess.

At Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, electrical, and heating. If at any time you are unsure about our services or what we provide, we are here to help.