Split System Installation South Melbourne

Split System Installation in South Melbourne

There’s nothing more enjoyable than coming home to a 40 degree day turning on your split system air conditioning and in a matter of minutes your house and your family is cool.

Split system air conditioning offers this versatility, which makes them tough to beat. But like all heaters and coolers to make sure they’re running at their best, they need to be maintained and maintained in a professional manner by experienced professionals. Melbourne Gas Heating Service offers experienced technicians who know split system air conditioners inside and out. They specialise in all makes and models giving you the assurance that we are able to complete the task at a professional level.

We offer a variety of different Split System Installation services which include the following:

• Split System Installation South Melbourne
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed to perform all kinds of work. If you’re in search of [keywords lower] South Melbourne services then contact Local Heating and Cooling Professionals South Melbourne today and talk with one of our helpful team members.

How Do Split Systems Work?

The split systems of air conditioning earn their name because half of that system (condenser) being outside the home, while the other portion (fan coil) is inside. In cooling, warm air from inside the room is absorbed by the fan coil before being is then removed, which results in cooling air returning to the house. Reverse cycle allows your heat pump operate in reverse to provide heating in cold weather.

The split system of air conditioning can be installed in individual rooms, zones or rooms joined by copper piping to an outdoor unit (condenser). Multi-head split air conditioning systems can be installed for as many as nine rooms with only one outdoor unit and allowing for the control of temperature for each room.

What Are The Ongoing Costs With Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the summer and winter time The annual operating cost would be measured at $272.34.

The reduction of Split System Running Costs

It’s not hard to cut down on your operating costs with the Split System. The model you buy, as well as its star rating, you will be able to determine how you’ll save each year. Beyond the initial cost and how you make use of the Split System can help as well.

Guide to Using A Split System

• Set the thermostat to 24C and 26C for cooling. Every degree lower in summer will raise the cost of running by approximately 10%..
• Make use of the economy setting in the event that your split system is equipped with one. You should also regularly maintain your air conditioner.
• Keep the sun’s heat away by closing the curtains and exterior blinds in the morning. Close windows and doors to areas being cooled when you have the split unit in operation.
• When the split system is switched off and its cooler outside, open doors as well as windows in order to let the cool air flow in.
• Insulate your property to help keep cool summer air out and keep the heat inside during winter.
• Dress appropriately for the weather conditions.

Why Choose Split Systems?

Split air conditioners mounted on walls are the most frequently owned residential air conditioning system, as they are affordable and simple to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout all seasons since it ensures the temperature at a constant level, reduces costs (less energy consumption) and creates a lot less sound when it is used. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall mounted divided AC system are most budget option for a small room apartment, small home or even a studio because they are relatively inexpensive to buy (depending on the amount of indoor units you will require) and they don’t require requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the room that it is placed in, so each room may have distinct temperature.

Air Quality

Many split air conditioning systems include air filtering functions and humidity control that control the amount of dust and humidity within the space. This gives sensitive customers (children older, asthmatic, or allergic users) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser which gives you satisfaction of having the best Air conditioner (in terms of physical and output constraints) for a particular room.

Split System FAQ

Are split systems similar to one would expect from an air conditioner?

Sure, Split System has an air-conditioning system. However, there are many types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate using refrigerant and electricity, based on the same principal but very different in terms of installation.

How long does it take to install a split system air conditioner?

In general an individual split system air conditioning installation can take 3-6 hours. However, the exact amount of time may vary based on many factors such as below:

• Size and location of both the outdoor and indoor unit
• The route of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of situations, if your air conditioner is at least 10-years-old and has apparent issues with your air conditioner, there is a good possibility that it will be more affordable to replace than repair.

To assist you in making the best decision To make the right choice, contact the experts at ComfyHome to provide you with an honest evaluation of the condition of your air conditioner.

What size of split system air conditioning will I require?

A typical measurement ratio is to multiply the area of the room by a factor of 0.15 in order to determine the power of the unit in Kilowatts.

For a room with a size of 40 square metres, you’ll need a Split system air conditioning unit of 6 kW. An air conditioning unit of 2.5kW is suitable for 10 -20 sqm room areas.

However, the amount of the Split system air conditioning required can be affected by other variables like the insulation of the room, the amount of people residing there and’ locations.

To make an accurate determination of the Split dimension, we suggest that you get in touch with us to request a thorough analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general an air conditioner is built to last 10-20 years, on an average. However, it is contingent on a variety of factors such as the model of the AC as well as the quality of the installation, the routine maintenance history and more…

It is important to service the Split System air conditioner regularly to extend its life and increase efficiency.

Do I need to clean the air conditioner’s air filter?

As per Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy usage by 5%-15 percentage.

South Melbourne Gas Heating Services

• Gas Hot Water System Installation & Repairs South Melbourne
• Gas Log Fire Service & Repairs South Melbourne
• Gas Heating South Melbourne
• Braemar Ducted Gas Heating Servicing & Repair South Melbourne
• Gas Space Heater Repair South Melbourne
• Carbon Monoxide Testing South Melbourne
• Vulcan Ducted Gas Heating Servicing & Repair South Melbourne
• Gas Heating Repairs South Melbourne
• South Melbourne
• Evaporative Cooling Repair South Melbourne
• Gas Heating Service South Melbourne
• Gas Heating Installation South Melbourne
• Gas Appliance Servicing & Repair South Melbourne
• Brivis Ducted Gas Heating Servicing & Repair South Melbourne
• Ducted Gas Heating Servicing & Repair South Melbourne

What Types of Systems We Service & Repair

Each brand and style of heating requires its individual operation and maintenance requirements; our experienced technicians are equipped with the expertise and know how to provide excellent services for all heating systems, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in repairs and maintenance of heating systems, specialising in all styles and brands of heating systems. We are proud of our fast response time and dedication to excellence, efficiency , and reliability.

We are able to maintain and service all leading brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re Personable & Friendly
• Experienced & Licenced Team
• Get a Quote Without Costs

Our Promise To You

At Melbourne Gas Heating Service we understand the discomfort of not having hot water, and it’s something that we would never want anyone to be forced to endure. This is why we put an emphasis on emergencies with hot water. All of our plumbers are courteous and reliable Without a doubt, we will be able to assist you in any situation.

We are proud of the quality of our customer service. It is our belief that the minor things matter most.

We are proud of our excellent customer service. and here’s the reason our customers love us:

• We always show up when promise to be there.
• Our techs will give you a a call when they are thirty minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always getting our hands clean after ourselves.

At Melbourne Gas Heating Service offer emergency and maintenance services for plumbing, electrical and heating. If you have some questions about our services and what we can offer, please contact us.